User manual PANASONIC CU3E23SBE

[. . . ] Before operating the unit, read these operating instructions thoroughly and keep them for future reference. ACXF55-01000 Nederlands Italiano Deutsch Español Français CS-ME5PKE Comment utiliser l’appareil Climatiseur 12-21 English Provide maximum comfort, clean air and optimise energy saving ECONAVI and AUTO COMFORT The Right Choice for Energy Saving Equipped with the human activity sensor, the air conditioner ensures to deliver cool or warm air to you, and keeps the room consistently comfortable with minimum energy consumption. Furthermore, the sunlight sensor detects the sunlight intensity and helps control heating/cooling temperatures to provide optimum comfort. Nanoe-G Purifies the air down to the smallest particles Deactivates harmful micro-organisms such as viruses, bacteria, etc. [. . . ] 5 How to use POWER TIMER AUTO COMFORT NANOE-G POWERFUL QUIET Multi Multi split system (Green) ECONAVI (Orange) (Green) (Blue) (Orange) (Orange) (Green) Indicator To optimise energy saving MODE To select operation mode AUTO - For your convenience HEAT - To enjoy warm air COOL - To enjoy cool air DRY - To dehumidify the environment MILD DRY COOLING Remote control display Human activity sensor Sunlight sensor and remote control receiver To improve humidity and moisture level • Function not applicable. AUTO HEAT COOL DRY MILD DRY FAN SPEED AIR SWING Multi POWERFUL/ QUIET To switch between powerful & quiet QUIET NORMAL ECONAVI OFF/ON AUTO COMFORT MODE NANOE-G POWERFUL MILD DRY COOLING TEMP POWERFUL: To reach temperature quickly POWERFUL POWERFUL/ / AIR SWING QUIET FAN SPEED • Press the button again or turn OFF the unit to stop this operation. QUIET: To enjoy quiet operation Multi TIMER ON 1 2 SET 3 Press and hold for approximately 10 seconds to show temperature setting in °C or °F. SET CHECK CLOCK RESET FAN SPEED To select fan speed (Remote control display) • For AUTO, the indoor fan speed is automatically adjusted according to the operation mode. Press the button once to use in AUTO mode. Press and hold the button until you hear 1 beep, then release to use in forced COOL mode. Press and hold the button until you hear 2 beeps, then release to use in forced HEAT mode. AUTO COMFORT To maximise comfort To set the timer 2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset times. 1 TIMER ON 1 2 AUTO COMFORT NANOE-G To purify the air 2 3 SET 3 NANOE-G OFF Cancel To deactivate viruses/bacteria on the filter NANOE-G POWER 2 Set the time 2 • After the unit is turned off, the nanoe-G in-filter deactivation may activate up to 150 minutes. Turning on the unit cancels this operation. € To disable this operation in the future, press and NANOE-G until a short beep sound is heard. This hold will not disable the nanoe-G to purify the air. € To restore the nanoe-G in-filter deactivation, press and NANOE-G hold until a long beep sound is heard. 3 Confirm SET TIMER • To cancel ON or OFF timer , press or OFF to select respective or then press CANCEL. € If timer is cancelled manually or due to power failure, you can restore the timer again by ON or OFF to select respective or pressing SET then press . • The nearest timer setting will be displayed and will activate in sequence. € When ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time. € Timer operation is based on the clock set in the remote control and repeats daily once set. € In HEAT mode, if AUTO is set, the horizontal louver is fixed at the predetermined position. The vertical louver swings left/right after the temperature rises. Note ECONAVI POWERFUL/ QUIET AUTO COMFORT NANOE-G ECONAVI POWERFUL/ QUIET AUTO COMFORT , , , • Can be activated in all modes and can be cancelled by pressing the respective button again. How to use • Can be activated even when the unit is turned off. [. . . ] € Extraction of remaining heat from the indoor unit (maximum 30 seconds). Operation is delayed a few minutes after restarting. POWER indicator blinks during HEAT mode with no • The unit is in defrost mode (and AIR SWING is set to AUTO). warm air supply (and louver is closed). [. . . ]