User manual PANASONIC CU-G125KE

[. . . ] · Ensure that the drainage pipe is connected properly. Power Supply · Do not pull the cord to disconnect the plug. · Switch off the power supply and unplug before cleaning or servicing. · Turn off the power supply and unplug if the unit is not used for a long period of time. [. . . ] European Community countries (*), should have a dedicated collection system for these products. Do not try to dismantle the system yourself as this could have harmful effects on your health and on the environment as a result of incorrect waste handling. This dismantling and disposal of refrigerant, oil and other parts must be done by a qualified installer in accordance with relevant local and national regulations. Air conditioners must be treated at a specialized treatment facility for re-use, recycling and recovery and should not be disposed of in the municipal waste stream. Please contact your installer, dealer or local authority for more information. Penalties may also be applicable for incorrect disposal of waste products, in accordance with national legislation. *subject to the national law of each member state Information on Disposal in other countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your installer, dealer or local authority and ask for the correct method of disposal. · Do not switch ON the unit when waxing the floor. After waxing, aerate the room properly before operating the unit. · Do not install the unit in oily and smoky areas. 3 ENGLISH PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS Ionizer Do not touch during operation. · If timer is cancelled manually or due to power failure, you can restore the previous setting (once power is SET . resumed) by pressing TO ACHIEVE TEMPERATURE QUICKLY OPTIONAL SETTINGS Press and hold for 5 seconds to dim or restore the unit's indicator brightness. Press and hold for approximately 10 seconds to show temperature setting in °C or °F. Press and hold for approximately 5 seconds to show 12-hour (am/pm) or 24-hour time indication. Press to restore the remote control's default setting. Not used in normal operations. CLOCK RC · Supersonic air purifying device (super alleru-buster) operates automatically once the unit is switched on. · , and can be activated in all modes and can be cancelled by pressing the respective button again. QUIET POWERFUL QUIET POWERFUL RESET , SET AC RESET Set the temperature 1°C higher in cool mode or 2°C lower in heat mode than the desired temperature to achieve a 10% power saving. Use curtains to screen off sunlight and outdoor heat to reduce power consumption during cool mode. 5 · and same time. can not be selected at the ENGLISH FAN SPEED TO SELECT FAN SPEED (5 OPTIONS) TO SET THE TIMER CARE & CLEANING CAUTION · Switch off the power supply and unplug before cleaning. · Do not touch the aluminium fin, sharp parts may cause injury. HINTS · Clean the filter regularly for best performance and to reduce power consumption. [. . . ] · This may due to damp smell emitted by the wall, carpet, furniture or clothing. Indoor fan stops occasionally during automatic · This helps to remove the surrounding odours. Operation is delayed a few minutes after · The delay is a protection to the unit's compressor. · Condensation or evaporation occurs on pipes. [. . . ]