User manual PANASONIC CUHE9JKE

[. . . ] Please consult authorized dealer or specialist for the installation work. · Do not insert your fingers or other objects into the unit, rotating parts may cause injury. · Do not attempt to repair the unit by yourself. Air inlet Indoor Unit · Do not install the unit in a potentially explosive atmosphere. [. . . ] · Do not install the unit in oily and smoky areas. 3 ENGLISH PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS Top grill Front panel Movable panel Auto OFF/ON button · Used when remote control is misplaced or malfunction. Press and hold until 1 beep is heard, then release. Press and hold until 1 beep is heard, then release. Press again until 2 beeps, then release. INDICATOR Mode Auto Cooling Heating Super allerubuster filter Air filters Airflow direction louver · Do not adjust by hand. (GREEN) (ORANGE) Receiver anc es: 8m (GREEN) (ORANGE) (ORANGE) xim um dist TO TURN ON OR OFF THE UNIT · Please be aware of the OFF indication on the remote control display to prevent the unit from starting / stopping improperly. Remote control display Ma +8/10° C HEAT AUTO HEAT COOL FA QUIE N T POWERFU L TO SET TEMPERATURE · Selection range: 16°C ~ 30°C (Not applicable for FAN mode). · Operating the unit within the recommended temperature could induce energy saving. TO SELECT OPERATION MODE +8/10 HEAT°C AIR SW ING SET AUTO mode - For your convenience · During operation mode selection the power indicator blinks. · Unit selects operation mode every 30 minutes according to temperature setting, outdoor and room temperature. HEAT mode - To enjoy warm air · Unit takes a while to warm up. The power indicator blinks during this operation. COOL mode - To enjoy cool air FAN mode - To circulate air in the room MOVABLE PANEL · Opens for air intake when operation starts, and closes when operation stops. During this time, do not hold it as it may cause malfunction or breakdown. 4 · To turn ON or OFF the unit at a preset time. · For AUTO, the indoor fan speed is automatically adjusted according to the operation mode. TO ADJUST AIRFLOW DIRECTION (5 OPTIONS) Select ON or OFF timer. or then AIR SWING · To cancel ON or OFF timer, press press . · Keeps the room ventilated. · If AUTO is set, the louvers swing left/right and up/down automatically. · In heat mode, the air blows horizontally for a while, then starts to blow downwards and the airflow louvers start to swing left/right after the temperature rises. +8/10°C HEAT · When ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time. · Timer operation is based on the clock set in the remote control and repeats daily once set. For clock setting, please refer to Remote Control Preparation at back cover. · If timer is cancelled manually or due to power failure, you can restore the previous setting (once power is . resumed) by pressing TO USE MAINTENANCE HEATING · Maintain indoor temperature at 8/10°C. Fan switches to high fan speed automatically. · This operation overwrite the operation mode and could be cancelled by pressing . [. . . ] · The unit stops and the timer indicator blinks. Use remote control to retrieve error code. Press until you hear beep sound, then jot down the error code. Note: · For certain error, you may restart the unit with limited operation with 4 beeps during operation starts. 1 3 4 Press for 5 seconds. [. . . ]