User manual PANASONIC CUTE42TKE

[. . . ] Multi air conditioner system Multi air conditioner systems save space by letting you connect multiple indoor units to a single outdoor unit. for complete product features , please refer catalogue. Use remote control within 8 m from the remote control receiver of the indoor unit. * Remote control display and functions may vary depending on the model. [. . . ] Do not pierce or burn as the appliance is pressurized. Do not expose the appliance to heat, flame, sparks, or other sources of ignition. Else it may explode and cause injury or death. Indd 6 12/19/2016 5:29:56 PM Indoor unit and outdoor unit Do not wash the indoor unit with water, benzine, thinner or scouring powder to avoid damage or corrosion at the unit. Do not use for preservation of precise equipment, food, animals, plants, artwork or other objects. this may cause quality deterioration , etc. Do not use any combustible equipment in front of the airflow outlet to avoid fire propagation. do not expose plants or pet directly to airflow to avoid injury , etc. Do not touch the sharp aluminium fin, sharp parts may cause injury. Do not switch ON the indoor unit when waxing the floor. After waxing, aerate the room properly before operating the unit. The indoor unit indicator will dim when this operation is activated. This is not applicable if the indicator brightness has been manually dimmed. € This operation can be set together with timer. sLEEP Sleep operation has the priority over OFF (Cancel) timer. € This operation can be cancelled by pressing This operation is incorporated with the the respective button when the sleep timer activation timer (0. English How to use To set the timer 2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset times. 1 ON TIMER OFF CANCEL 2 3 SET 1 Select ON or OFF timer • Each time pressed: Cancel Example: OFF at 22:00 2 Set the time 3 Confirm • To cancel ON or OFF timer, press or to select respective or then press . € If timer is cancelled manually or due to power failure, you can restore the timer again by pressing or to select respective or then press . • The nearest timer setting will be displayed and will activate in sequence. € Timer operation is based on the clock set in the remote control and repeats daily once set. for clock setting , please refer to Quick Guide. [. . . ] Press the button once to use in AUTO mode. Press and hold the button until you hear 1 beep, then release to use in forced COOL mode. Press and hold the button until you hear 2 beeps, then release to use in forced HEAT mode. AUTO OFF/ON ■The indicators are too bright • To dim or restore the unit’s indicator brightness, press and hold for 5 seconds. [. . . ]