User manual PANASONIC CX-D3000U

[. . . ] Mobile DVD-Video Player Lecteur DVD-Vidéo mobile Reproductor Movil de DVD-VIDEO CX-D3000U CAR AV Operating Instructions Manuel d'instructions Manual de instrucciones Please read these instructions carefully before using this product and save this manual for future use. Prière de lire ces instructions attentivement avant d'utiliser Ie produit et garder ce manuel pour l'utilisation ultérieure. Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro. Safety Information WARNING: E N G L I S H TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE ONLY THE INCLUDED COMPONENTS. WARNING: NOT FOR USE WHERE VIDEO MONITOR IS VISIBLE TO DRIVER TO AVOID RISK OF SERIOUS INJURY OR POSSIBLE VIOLATION OF STATE LAWS. CAUTION: THIS PRODUCT IS A CLASS I LASER PRODUCT. [. . . ] If the disc still does not eject, press the reset switch (page 31). Disc is dirty. Disc has scratches. CD-text is not displayed normally. Clean the disc, referring to the section on "Notes on Disc". (page 34) The first track of a mix mode disc was reproduced. (Mix mode is a format in which data except music is recorded on the first track and music data is recorded on other than the first track in a session. ) This player does not support mix mode discs. Playback the disc containing only music data or only MP3 data. Check the settings for the monitor itself. Stop the car and apply the parking brake. Some operations are not permitted with certain discs. Refer to the guide provided with your disc. Time is counted but no sound comes out. The picture does not appear on the monitor. The buttons do not work. Two REMOTE IN connectors are connected. Do not connect the remote control signal receiver when remote control signals can be received by the display unit. Video CD menu playback works only when playing a video CD that has the playback control feature. A certain amount of distortion is normal. Video CD menu playback does not work. The picture becomes distorted while fast forwarding or reversing. 28 CX-D3000U DVD/Video CD/CD (continued) Trouble No subtitles appear. (Dolby digital DVD software only) The sound volume level is too low or too high. Cannot switch the audio language/subtitle language/angle. Cause/Step Subtitles must be recorded on the disc, or they will not appear. Refer to the guide provided with your disc. Range Compression" to "Minimum". E N G L I S H 20 Adjust the output level at the menu of "Audio Output Level". It is not possible to switch if the disc does not have multiple audio languages/subtitle languages/angles recorded on it. Refer to the guide provided with your disc. Some discs permit switching through a menu screen. Sometimes, switching angle is possible only with certain scenes. If audio or subtitles in that language are not recorded on the disc, the audio or subtitles do not switch to that language. [. . . ] Remove approximately 1/4z (5 mm) of protective covering from the ends of the leads before connecting. Do not insert the power connector into the unit until the wiring is completed. Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables and keep cable terminals free from touching any metal parts. [. . . ]