User manual PANASONIC CX-DP1212

[. . . ] HOWEVER THIS PRODUCT USES A VISIBLE/ INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THIS PRODUCT CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. [. . . ] (page 34) The disc is inside but there is no sound. The player can only play the following types of discs: DVD video, Video CD, CD and CD-DA data recorded CD-R and CD-RW, and MP3 data recorded CD media (CD-ROM, CD-R, CD-RW). The player may not successfully play back a CD-R/RW that is made in combination of writing software, a CD recorder (CD-R/RW drive) and a disc which are incompatible one another. Refer to instructions for the concerned devices for details. The player cannot play audio on dts CDs or DVDs unless a digital surround processor is used (page 42­43). CX-DP1212 27 Troubleshooting(continued) DVD/Video CD/CD (continued) E N G L I S H 19 Trouble Disc is dirty. Disc has scratches. Cause/Step Sound skips, bad sound quality (e. g. caused by noise). Clean the disc, referring to the section on "Notes on Disc". (page 34) The player may not successfully play back a CD-R/RW that is made in combination of writing software, a CD recorder (CD-R/RW drive) and a disc which are incompatible one another. Refer to instructions for the concerned devices for details. Adjust mounting angle to less than 30°. Mount the player securely with the mounting parts, referring to the section on installation. Disc is defective. If audio or subtitles in that language are not recorded on the disc, the audio or subtitles do not switch to that language. (Some discs permit switching through a menu screen. ) Refer to the guide provided with your disc. Check the setting for "Menu Language" in the user settings. The audio/subtitle language selected in the user settings is not used. Messages in the menu screen are not in the desired language. MP3 Trouble Cause/Step The disc does not conform to any of the file systems supported by this player. Insert a disc that conforms to the file systems (ISO 9660 Level 1, Level 2, Joliet, Romeo or Apple Extension to ISO 9660). The ". mp3" file name extension is missing in the MP3 files. Make sure to add the ". mp3" extension to each MP3 file name. The recording quality differs depending on the encoding software used, and on settings such as the bit rate. Set the bit rate within the range specified in the specifications chart (page 45). It is recommended to set the bit rate to "128 kbps or more" and "Fixed". High-speed writing was executed when MP3 data was recorded on the disc. [. . . ] Not used. Side brake (parking brake) connection lead (page 44) Be sure to connect this as a safety measure. PARKING BRAKE (Blue/yellow stripe) ACC power lead To ACC power, +12 V DC. ACC (Red) Battery lead To the car battery, continuous +12 V DC. Connect the battery power cord to a connector that is always supplied with power from the car battery. Ground lead To a clean, bare metallic part of the car chassis. BATTERY 5A (Yellow) (Black) 40 CX-DP1212 Caution: This product is designed to operate with a 12 V DC, negative ground battery system. To prevent damage to the unit, be sure to follow the connection diagram below. [. . . ]