User manual PANASONIC CY-TUP153N

[. . . ] TV Tuner CY-TUP153N Operating Instructions Bedienungsanleitung Manuel d'instructions Manuale di istruzioni Manual de Instrucciones Please read these instructions carefully before using this product and keep this manual for future reference. Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren Sie sie danach für spätere Nachschlagzwecke sorgfältig auf. Prière de lire ces instructions attentivement avant d'utiliser le produit et garder ce manuel pour l'utilisation ultérieure. Si prega di leggere attentamente queste istruzioni prima di usare questo prodotto e di conservare questo manuale per usi futuri. [. . . ] iPod® iPod is a trademarks of Apple Computer, Inc. , registered in the U. S. and other countries. 12 CY-TUP153N CY-TUP153N 13 English 12 Recommended System and Operation (continued) English TV Tuner Unit 13 TV ANT IN Terminal for connecting TV antennas (supplied) TV OUT Terminal for connecting a Indash Monitor (CY-VM7203N, option). REMOTE IN (Black) Terminal for connecting a Head Unit's remote output terminal. Refer to page 8 about the TV AREA (Country) setting. Refer to page 10 about the DIVER (Diversity) Antenna setting. Read the explanation on this page as required. DIVER (Diversity) Antenna Setting Diversity TV Antenna: Of the two antennae connected to the system, the one with the best reception is automatically selected for TV reception. Turning DIVER (Diversity) setting to "ON" reduces noise. Confirm "ON" to receive a good reception. Default: ON Setting: ON/OFF Press [PWR] (Power). Press [MENU]. [PWR] (Power) [ENT] (ENTER) [MENU] L (White) R (Red) TO HEAD UNIT/EXPANSION MODULE (System-up connector) Terminal for connecting a Head Unit (CQ-VD7003N, CQVD6503N, option)/Expansion Module (CY-EM100N, option). VIDEO (Yellow) Connect RCA cord to the video input terminal of the Head Unit when connecting Head Unit/Expansion Module Connecting Cable to the Head Unit. [] [] [] [] Group and TV AREA (Country) Group GROUP1 POWER SUPPLY Terminal for connecting to the power connector GROUP2 GROUP3 GROUP4 [PWR] (Power) Switches on/off the power. (page 16) [ENT] (ENTER) Determines an operation or item. (page 16) Searches for channels and memorizes them automatically. (page 17) [MENU] Shows the menu screen. (page 15) [] [] (PRESET) Selects DIVER or TV AREA setting. (page 17) Sets the preset channel writing/deleting mode. (page 17) GROUP5 GROUP6 GROUP7 GROUP8 GROUP9 GROUP10 GROUP11 GROUP12 TV AREA (Country) Austlia, Belgium, Bosnia/h, Denmark, Finland, Germany, Iceland, Netherlands, Norway, Portugal, Slovenia, Spain, Sweden, Switzerland Russia Italy Rumania, Hungary, Czech Ireland United Kingdom Angola Australia China Indonesia New Zealand South Africa Press [] or [] to select "TV AREA". Press [] or [] to select the group included your country. (See the left table. ) Press [ENT] (ENTER) or [MENU] to set and return to the previous display. Press [] or [] to select "DIVER". Press [] or [] to select "ON" or "OFF". Press [ENT] (ENTER) or [MENU] to set and return to the previous display. Remote Control Unit Note: Point the emitter of the remote controller at the Head Unit or the monitor. TV AREA (Country) Setting TV AREA: TV reception area is consisted of 12 group. See the left table to select the group where you operate this unit. [. . . ] Make sure that the battery lead is connected securely, and preset channels again. Preset channels cannot be stored. Remote Control Unit Problem No response to pressing buttons. Possible cause Possible solution The battery is inserted in the wrong direction. Insert a correct battery in the correct direction. The aimimg direction of the remote control unit is wrong. [. . . ]