User manual PANASONIC CZRD513C

[. . . ] TEST RUN AUTO HEAT FAN COOL DRY FILTER OFF / ON CZ - RD513C REMOTE LOCAL HEAT FAN COOL PRIORITY TIMER 1 2 3 4 5 6 FAN SPEED MON TUE WED THU FRI SAT SUN AUTO ON LO MED HI AUTO HEAT FAN COOL DRY FILTER RESET AIR SWING ECO OFF ADDRESS A/C No. ODOUR WASH CHECK SET AUTO 123 TEST RUN NOT AVAILABLE VENT. PRE HEAT DEFROST DEMAND OFF / ON TEMP/ A/C No. UP Airflow Direction Setting Display This display shows the airflow direction setting. When AUTO is set, the louver swing mode can be selected from standard, upward and downward. [. . . ] Temperature Setting button This button is used to set the room temperature. 1 2 Turn on the power supply Press "SELECT button" TIMER/CLOCK MODE UP SET OFF / ON TEMP/ A/C No. UP TIMER/CLOCK MODE UP SET FAN SPEED MODE SELECT DOWN CANCEL AUTO MANUAL DOWN Manual Airflow Direction Selection button Fix the airflow direction manually. Airflow direction is changed every time this button is pressed. Filter Reset button After the filter has been cleaned, press this button to clear the "FILTER RESET" display. Test Run button This button is used during test run. Auto Airflow Direction Selection button This button is used to select "Multi Comfort Air Control" (Automatic louver swing direction). Ventilation button When a ventilating device (optional) is attached, this button is used to run and stop the ventilating device. Economy button This button is used to run and stop the economy operation. SELECT DOWN CANCEL ECONOMY CHECK ODOUR WASH AIR SWING VENTILATION TEST RUN FILTER RESET Below displays will appear MON "MON" and "12:00" will be blinking 3 4 Select Current Day To set the current day, press "UP or DOWN button" to select current day. (Refer to above example; select WED) To confirm the selected day, press "SET button". Select Current Time To set the current time, press "UP or DOWN button" to select current time. (Refer to above example; select 8:00) To confirm the selected time, press "SET button". Odour Wash button This button is used to run and stop the odour wash (odour removing) operation. Long pressing of this button starts odour wash (odour clear) operation. Check button Press this button if the check display is flashing. An error code from F15-F46 will be displayed. Immediatelly call your nearest service center. Timer Setting button Group This button group is used for timer setting. For details, please refer to the descriptions on subsequent pages. Basic functions of each button are as follows: MODE - Changes clock and timer display or goes back to the previous display SELECT - Starts timer setting mode UP - Increases the time DOWN - Decreases the time SET - Confirms general settings and timer setting. Resumes all timer settings collectively. Cancels all the timer settings collectively. Note : - Press "UP button" to increase or "DOWN button" to decrease (interval 1 minute) or hold the button to change the time faster. - If the "UP or DOWN button" is not pressed for 30 seconds during the day or time setting or if the "SELECT button" is pressed, the setting at that moment is confirmed and setting will end. Final CLOCK Display WED ":" will be blinking 3 4 How to Select the Timer 2 types of Timer mode can be selected on the remote control. - Daily Timer - Weekly Timer These timers cannot be operated simultaneously. [. . . ] TIMER 2nd program ­ select OFF and desired time to 16:00 MON TUE WED THU FRI 3rd ~ 6th program ­ press "CANCEL button". To set B (Wednesday ­ Individual day setting) Press "UP or DOWN button" to select WED (Wednesday). To set the time, please refer to step 3. 1st program ­ press "SET button" twice (confirm ON and 9:00) 2nd program ­ also press "SET button twice. (Confirm OFF and 16:00) 3rd program ­ select OFF and desired time to 12:30 4th program ­ select ON and desired time to 13:30 5th ~ 6th program ­ press "CANCEL button". [. . . ]