User manual PANASONIC CZRD52CP

[. . . ] · During soft dry operation, the indoor fan operates at a low fan speed. · The louvers movement might not align with the remote control display. 4 TO SELECT FAN SPEED (5 options) FAN SPEED Select Current Time Press or to select current time. (Refer to the above example; select 8:00) SET To confirm the selected time, press . UP DOWN · For AUTO, the indoor fan speed is automatically adjusted according to the operation mode. 5 TO ADJUST VERTICAL AIRFLOW DIRECTION (5 options) · Keeps the room ventilated. · If AUTO is set, the louvers swing up/down automatically. [. . . ] The unit will automatically switch ON at 9:00. Only OFF Timer is selected. The unit will automatically switch OFF at 18:30. Both ON and OFF Timer are selected. 5 6 WEEKLY TIMER SETTING WEEKLY TIMER SETTING How to Set Weekly Timer - You can set the Timer for each day of the week (Monday to Sunday) with 6 programs per day. - ON Timer can be set together with your desired temperature and this temperature will be used continuously. - Same timer program cannot be set in the same day. - You may also select collective days with same timer setting. - Promotes energy saving by allowing you to set up to 6 programs in any given day. Cancel Current Timer Program Perform the steps below to cancel the timer program for a particular day. TIMER/CLOCK MODE UP SELECT 1, 3 2 4 1. Press SELECT to enter day. UP 2. Press Timer SELECT or or DOWN until your desired day is shown. will disappear. OFF/ON DOWN SET to enter program setting. UP DOWN CLOCK CANCEL 4. Press Timer Press CANCEL Day and Timer Set Up Method 1. Press Timer MODE to cancel the program, for 4 seconds to change display to weekly timer. For example, if you want to set: A - Monday to Friday: Unit ON at 09:00 with 20°C (program 1) & unit OFF at 18:30 (program 2). B - Only Wednesday: Add timer to turn OFF the unit at 12:30 (program 3) and turn ON the unit at 13:30 (program 4). To set A (Monday to Friday ­ Collective day setting) To set the time, please refer to steps 1 to 7 of "Day and Timer Set Up Method" on page 7. Program 1 ­ select ON, set desired time to 9:00 and desired temperature to 20°C. Program 2 ­ select OFF and set desired time to 18:30. Program 3 ~ 6 ­ no timer program set, press To set B (Wednesday ­ add new timer program) 1. Press SELECT UP or DOWN to select your desired day. SELECT to confirm your selection. to set program 1. OFF/ON or wait 30 seconds to exit weekly timer. 4. [. . . ] Press SELECT MODE · To enable previous weekly timer setting, press , then press . to enter timer mode. DOWN SELECT TROUBLESHOOTING TROUBLESHOOTING The following symptoms occur when abnormality occurs during operation. · The unit stops and operation LED OFF. · OFF indicator does not shown on remote control display. When abnormality occurs, use remote control to retrieve error code. Ensure the operation LED is in OFF condition. [. . . ]