User manual PANASONIC DIGA DMR-ES30

[. . . ] DMR-ES30V DVD Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. If you have any questions contact In the U. S. A: 1-800-211-PANA(7262) In Canada: 1-800-561-5505 For U. S. A. [. . . ] The display changes as follows each time [STATUS] is pressed. Clock ) Counter ) Remaining tape time ^--------------------------------------------------------} 51 VQT0N92 Recording Recording DVD/VHS POWER TV POWER INPUT SELECT TV/VIDEO CH VOLUME VHS Scheduled Recording You can enter up to 16 programs a month in advance. Preparation Select the unit viewing channel (e. g. Check that the clock is set to the correct time. Insert a video cassette with an intact accidental erasure prevention tab. (l 48) Press [VHS]. VHS VHS OPERATION SELECT DVD TRACKING/V-LOCK Numeric buttons CANCEL/RESET RESET AUDIO VCR Plus+ CM SKIP SLOW/ REW SEARCH FF PLAY VCR Plusi Using VCR Plus_ system Entering the PlusCode® numbers is an easy way of scheduled recording. You can find these codes in TV listings in newspapers and magazines. When connecting a cable TV box or satellite receiver, the VCR Plusi system does not work. Program the scheduled recording manually (l 53). SKIP/INDEX DIRECT NAVIGATOR FUNCTIONS TOP MENU VHS MENU 3, 4, 2, 1 ENTER SUB MENU RETURN [1] Press [VCR Plus_]. VCR Plus+ S SCHEDULE DISPLAY STATUS TIME SLIP JET REW RETURN R 2 : 00 SP 10/13 WE 10:12 AM ssssssss SCHEDULE REC REC MODE DVD ERASE ADD/DLT CREATE CHAPTER VCR/TV REC MODE COPYING VHS DVD [2] Press the numeric buttons to enter the PlusCode number. Press [2] to move back to correct a digit. Cautions for using scheduled recording on DVD and VHS Scheduled recording automatically starts at the set time. Scheduled recording can be started whether the unit is turned on or off. When the unit is turned off, the sound and the video cannot be outputted to the TV. [3] Press [ENTER]. SCHEDULED RECORDING R 2 : 00 SP 10/13 WE 10:12 AM CH 25 DATE ON OFF 13WE 10:12 AM 10:30 AM S P Scheduled recording for TV programs cannot be executed on both DVD and VHS at the same time. Make sure the scheduled recording start times do not overlap on both DVD (l 29) and VHS (l 53) Scheduled Recording screens. When the scheduled recording settings overlap: When the start time of both scheduled recordings is the same, the scheduled recording of DVD has priority. When the same tuner channels are specified in scheduled recordings on both VHS and DVD, only one scheduled recording can be started. When the interval between the first scheduled recording and the second scheduled recording on DVD is 1 minute or less as shown below, the second scheduled recording on DVD has priority over the scheduled recording on VHS even if its start time is later than the scheduled recording on VHS. Confirm the program and correct it if necessary using [3, 4, 2, 1]. ("Manual programming" l 53, step 2) "INVALID ENTRY" is displayed when you enter the wrong PlusCode number. Reenter the PlusCode number. [4] If the program is correct Press [ENTER]. " " lights on the unit's display. Repeat steps 1­4 to program other recordings. [5] Press [RETURN]. 1 minute DVD 2 CH VHS 4 CH 10 CH When the scheduled recording settings of DVD and VHS are overlapped, the setting of DVD takes priority. " " lights on the unit's display of both sides in the standby mode. When the recording starts, " remains lit and the " " on the recording side (DVD side) " on the other side (VHS side) starts flashing. 52 VQT0N92 Recording Manual programming When connecting a cable TV box or satellite receiver, select the channel on the cable TV box or satellite receiver before scheduled recording starts. VHS Auto SP/EP mode If, at the beginning of a scheduled recording, there is not enough tape remaining to complete the recording, the SP/EP function will automatically run the tape at EP speed for recording. This ensures that the entire program will be recorded. If EP mode is not enough to stretch the remaining tape to fit the whole program you will not be able to record the whole TV program. Scheduled recording 1st program (30 min. ) 2nd program (60 min. ) [1] Press [SCHEDULE]. Make sure "NEW SCHEDULED RECORDING" is selected. NEW SCHEDULED RECORDING is selected. CH 25 DATE ON OFF SP 13WE 10:12 AM 10:30 AM NEW SCHEDULED RECORDING [2] Press [ENTER] to move and change the items using [3, 4, 2, 1]. SCHEDULED RECORDING R 2 : 00 10/13 WE SP 10:12 AM ss CH ss DATE ssss ON s : ss OFF s : ss 30 min. [. . . ] El visualizador cambia tan pronto como se pulsa cada vez [STATUS]. Reloj ) Contador ) Tiempo que queda en la cinta ^-------------------------------------------------------------} El tiempo que queda en la cinta podría no visualizarse correctamente según la cinta usada. Modo SP/EP automático Si al comienzo de la grabación temporizada, no queda cinta bastante para terminarla, la función SP/EP hará marchar automáticamente la cinta a la velocidad EP para la grabación. Esto garantiza que será grabado el entero programa. Si el modo EP no es bastante para alargar la cinta para que se adapte al entero programa, no será posible grabar el entero programa TV. [. . . ]