User manual PANASONIC DIGA DMR-E75

[. . . ] Operating Instructions DVD Video Recorder Model No. DMR-E75V Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read these instructions completely. [. . . ] You can increase Cue/Review search speed. Press [1, PLAY] to restart playback. Select search speed to view the recorded picture. (l 56) The picture that appears in EP or VP mode at approx. It is not a malfunction but if it happens, change to approx. The picture may not be in colour or may be distorted depending on the TV. 49 Playback DVD/VHS POWER TV VHS CH, W, X CH VOLUME Adjusting the playback picture Manual tracking The unit usually makes tracking adjustments, but you may need to do it manually if noise appears on a tape recorded on other equipment. During play POWER INPUT SELECT TV/VIDEO TV/VIDEO DVD/VHS OUTPUT VHS DVD TRACKING/V-LOCK VHS TRACKING/ V-LOCK, r, s Numeric Buttons CANCEL/RESET AUDIO VCR Plus+ CM SKIP SLOW/ REW SEARCH FF PLAY Press [TRACKING/V-LOCK, r] or [TRACKING/V-LOCK, s]. Repeat until the noise disappears. SKIP/INDEX Vertical locking adjustment 1 ; Adjust the vertical to stop the picture from jiggling while paused. While paused DIRECT NAVIGATOR TOP MENU FUNCTIONS VHS MENU Press [TRACKING/V-LOCK, r] or [TRACKING/V-LOCK, s]. Repeat until the jiggling stops. SUB MENU RETURN To return to auto tracking Press both [TRACKING/V-LOCK, r] and [TRACKING/V-LOCK, s] simultaneously. PROG/CHECK DISPLAY STATUS TIME SLIP REC MODE µ Preparation Press [VHS]. VHS REC REC MODE DVD REC ADD/DLT CHAPTER DVD ERASE DUBBING VHS DVD STATUS To remove the noise from a paused picture Start slow play, then adjust the tracking. Note: This may not work with some TV models and tapes. You can also adjust the tracking and vertical with [CH, W, X] on the unit. S-VHS Quasi Playback (SQPB) It is also possible to play back tapes recorded in the S-VHS system. Some picture noise may occur depending on the type of tape used. It is not possible to fully obtain the high resolution that S-VHS is capable of. It is not possible to record in the S-VHS system with this unit. Repeat Playback During play or while stopped Keep pressing [1, PLAY] for 5 or more seconds. The "RP" indication appears on the display. At the end of the program, the tape rewinds to the beginning of the program and plays it again (it only works if there is at least 5 seconds blank at the end of the program). This repeats until you cancel it. To cancel Press [, STOP]. 50 Recording Recording TV programs Preparation Select the unit viewing channel (or the AV input) on the TV. Check that the clock is set to the correct time. If it has not been set, refer to page 46. Press [VHS]. VHS To specify a time to stop recording While recording Press [¥, VHS REC] to select the recording time. On the main unit, press [¥, REC]. Unit's Display Each time you press the button: Counter (cancel) # 0:30 # 1:00 # 1:30 ^------- 4:00 !2:00 !--------} For your reference This does not work during timer recording. Recording stops and the set time is cleared if you press [, STOP]. The set time is cleared if you change the recording mode or channel while recording is paused. [1] Insert a video cassette with an intact erasure prevention tab. (l 48) [2] Press [CH, W, X] to select the TV station. If you keep pressing these buttons, the channels change quickly. [. . . ] en EP Segundo programa (60 min. ) Uso del sistema VCR Plus+ Se refiera a "Uso del sistema VCR Plus+", paso 1­5. (l 80) Programación manual Cuando se conecte una caja TV de cable o un receptor de satélite, seleccione el canal en la caja TV de cable o receptor de satélite antes de que comience la grabación temporizada. No es posible activar automáticamente el modo VP. La longitud de la cinta ha de ser ajustada correctamente. Algunas cintas podrían no funcionar correctamente. [. . . ]