User manual PANASONIC LUMIX DMC-FX50

[. . . ] Operating Instructions Digital Camera Model No. DMC-FX50 PP Before use, please read these instructions completely. GC SG VQT0Y35 Before Use Before Use Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read these Operating Instructions carefully and keep them handy for future reference. · Other names, company names, and product names printed in these instructions are trademarks or registered trademarks of the companies concerned. THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. Information for Your Safety WARNING TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES AND DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. [. . . ] · ISO sensitivity is automatically set to the following optimal value. ­ [ISO3200] · The focus range becomes the same as macro mode. [5 cm (Wide)/30 cm (Tele) to ¶] · The flash setting is fixed to Forced OFF [ ]. · The extra optical zoom and digital zoom cannot be used. 54 VQT0Y35 Advanced 1 2 [BABY1]/ [BABY2] MENU /SET Press [ ] to display the [SCENE MODE] menu and select a scene mode. (P48) This mode allows you to take pictures of a baby with a healthy complexion. When the flash is used, the light from it is weaker than usual. You can set the birthdays of two babies by using [BABY1] and [BABY2]. · The baby's age can be displayed when playing back pictures. · The age can also be printed on each picture by using the software [LUMIX Simple Viewer] in the CD-ROM (supplied). (For information about printing, refer to the separate operating instructions for PC connection. ) Age display setting · If you want the age to be displayed, set the birthday in advance, select [WITH AGE] and press [MENU/SET]. · If you do not want the age to be displayed, select [WITHOUT AGE] and press [MENU/SET]. 1 1 BABY1 WITH AGE WITHOUT AGE · The focus range becomes the same as macro mode. [5 cm (Wide)/30 cm (Tele) to ¶] · ISO sensitivity is fixed to [ ]. · After turning on the camera in [BABY1]/ [BABY2] in scene mode or switching to [BABY1]/[BABY2] from other scene modes, the age and current date and time are displayed for about 5 seconds at the bottom of the screen. · The age display style differs depending on the language setting in the recording mode. · The display style when printing may differ slightly from the display style on the screen. · The date of birth is displayed as [0 month 0 day]. · If the age is not properly displayed, check the clock and birthday settings. · If the camera is set to [WITHOUT AGE], the age is not recorded even if the time and birthday are set. This means the age cannot be displayed even if camera is set to [WITH AGE] after taking the pictures. · Use [RESET] in the [SETUP] menu to reset the birthday setting. (P20) 3 9 months 10days 10:00 1. DEC. 2006 BIRTHDAY SET. CANCEL SELECT SET MENU Birthday setting 1 Move 3/4 to select [BIRTHDAY SET. ] and then press [MENU/SET]. [. . . ] However this is not a malfunction. 9: The file numbers are not recorded consecutively. · When you perform an operation after taking a certain action, the pictures may be recorded in folders with different numbers from the ones used prior to the operation. (P93) 10: The file numbers are recorded in ascending order. · If the battery is inserted or removed when the camera is not turned off, the recorded folder numbers are lost. [. . . ]