User manual PANASONIC DMCFP3

[. . . ] Operating Instructions for advanced features Digital Camera Model No. DMC-FP3 Before connecting, operating or adjusting this product, please read the instructions completely. VQT2P49 Quick start guide The battery is not charged when the camera is shipped. Charge the battery and set the clock before use. When you do not use the card (optional), you can record or play back pictures on the built-in memory (12). Charge the battery Contents Before use Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] T : 50 cm (1. 64 feet) and above Takes pictures of rapid movement or a decisive moment. Touch a number of recording pixels (aspect ratio). [HI-SPEED BURST] Take pictures. (Hold shutter button) Still pictures are taken continuously while the shutter button is pressed fully. 15 or Number of memory more recordable Approx. 15 to 100 pictures Card (The maximum is 100) The burst speed and number of recordable pictures change according to the recording conditions or types of cards. T : 50 cm (1. 64 feet) and above · The number of burst recording pictures increases immediately after formatting. · The picture quality becomes slightly lower. · Main fixed settings [FLASH]: [FORCED FLASH OFF] [SENSITIVITY]: ISO500 - 800 · The focus, zoom, exposure, White Balance, shutter speed and ISO sensitivity are fixed to the settings for the first picture. · The following functions cannot be used. Extended Optical Zoom/[DIGITAL ZOOM]/[SELFTIMER]/[BURST] · If recording is repeated, depending on the usage conditions, there may be a delay before the camera takes pictures again. 46 VQT2P49 VQT2P49 47 Taking pictures according to the scene [SCENE MODE] (Continued) Recording Mode: How to select a scene (42) Using flash in Scene Modes (37) Scene Uses, Tips Enables continuous recording in dim locations. Touch a number of recording pixels (aspect ratio). Notes · The picture quality becomes slightly lower. · Main fixed settings [FLASH]: [FORCED FLASH ON] [SENSITIVITY]: [ ] (Automatically set in a range up to 3200) · The focus, zoom, exposure compensation, shutter speed, and ISO sensitivity are all fixed at the setting for the first picture. · The shutter speed becomes 1/30th of a second to 1/1600th of a second. · The following functions cannot be used. Extended Optical Zoom/[DIGITAL ZOOM]/[BURST] · For details about flash (36) Scene Uses, Tips Takes clear pictures of fireworks in the night sky. Tips · Stand at least 10 m (32. 8 feet) away. · Tripod recommended. Notes · Shutter speed can be set to 1/4 second or 2 seconds (if there is a little jitter or if Optical Image Stabilizer is [OFF]). (when not using exposure compensation) · Main fixed settings [FLASH]: [FORCED FLASH OFF] [SENSITIVITY]: ISO80 [AF ASSIST LAMP]: [OFF] · [AF MODE] default setting is (Face Detection). · Do not touch camera with wet hands. · Battery life is reduced in lower air temperatures. · Main fixed settings [FLASH]: [FORCED FLASH OFF] [AF ASSIST LAMP]: [OFF] · Turn the camera off when taking off or landing. · When using the camera, follow all instructions from the cabin crew. [. . . ] Normal brightness will return once the internal components have warmed up. the monitor. Personal Information Caring for your camera To clean your camera, remove the battery or disconnect the power plug from the outlet, and wipe with a soft, dry cloth. Use a well-wrung wet cloth to remove stubborn stains, before wiping again with a dry cloth. Do not use benzene, thinners, alcohol, or kitchen detergent, as these may damage the outer casing and finish of the camera. [. . . ]