User manual PANASONIC DMC-G70EB

[. . . ] DMC-G7 DMC-G70 Please read these instructions carefully before using this product, and save this manual for future use. Message Display Troubleshooting Finding the information you need Contents Contents by Function Menu list P372 P387 P2 P6 P12 P376 SQW0395-1 F0515KD1075 until 2015/7/24 Finding the information you need In this “Operating Instructions for advanced features”, you can find the information you  need from the following pages. π   By clicking a page number, you can jump to the linked page and quickly find the information. Search from “Contents”  Click this icon to jump to “Contents”. [. . . ] This may only be selected when using a lens that is compatible with power zoom (electrically operated zoom). ) MENU > [Custom] > [Power Zoom Lens] When you zoom, the focal distance is displayed and you can confirm the zoom position. A Focal distance indication B Current focal distance [ON]/[OFF] When you operate the zoom with this setting [ON], the zoom will stop at positions corresponding to predetermined distances. C Step zoom indication • This setting does not work when recording motion pictures or 4K photos with [ ] ([4K Pre-Burst]). [ON]/[OFF] [Disp Focal Length] A B C [Step Zoom] When you turn this unit on, the zoom positions when you last turned this unit [Zoom Resume] off are automatically restored. [ON]/[OFF] You can set the zoom speed for zoom operations. € If you set [Step Zoom] to [ON], the zoom speed will not change. [Zoom Speed] [Photo]: [H] (High speed)/[M] (Middle speed)/[L] (Low speed) [Video]: [H] (High speed)/[M] (Middle speed)/[L] (Low speed) This may only be selected when a power zoom-compatible lens with a zoom lever and zoom ring is attached. When set to [OFF], the operations controlled by the zoom ring are disabled to prevent accidental operation. Stabiliser, Zoom and Flash Zooming using touch operations You can perform zoom operations by touching. (Touch zoom) (Optical Zoom and Extra Tele Conversion for still picture recording are operable) • If you are using an interchangeable lens not supporting power zoom (H-FS1442A/H-FS45150/ H-FS14140), you can only operate the Extra Tele Conversion for pictures by setting [Ex. € The zoom speed varies depending on the touched position. [ [ ]/[ ]/[ ] ] Zooms slowly Zooms quickly • Touch [ ] again to end touch zoom operations. Stabiliser, Zoom and Flash Taking pictures by using the flash Applicable modes: ∫ Open/Close the built-in flash Taking a picture using the flash becomes possible by opening the built-in flash. A To open the flash Press the flash open button. B To close the flash Press the flash until it clicks. € Forcibly closing the flash can damage the camera. € Be sure to close the built-in flash when not in use. € The flash setting is fixed to [Œ] while the flash is closed. € Be careful not to catch a finger when closing a flash bulb. Stabiliser, Zoom and Flash Forcing the flash off ([Œ]) When the flash is closed or pictures cannot be taken with the flash due to motion picture recording, etc. , [Œ] (forced flash off) is displayed on the recording screen and the flash will not fire. [. . . ] ¢ SSID refers to the name that is used to identify a network over a wireless LAN connection. If the SSID matches for both devices, transmission is possible. € Micro Four Thirds™ and Micro Four Thirds Logo marks are trademarks or registered trademarks of Olympus Imaging Corporation, in Japan, the United States, the European Union and other countries. € Four Thirds™ and Four Thirds Logo marks are trademarks or registered trademarks of Olympus Imaging Corporation, in Japan, the United States, the European Union and other countries. [. . . ]