User manual PANASONIC DMCGX1XEC

[. . . ] It may also malfunction or image may not be recorded. Press hard on the lens or the LCD monitor. This camera is not dust/drip/water proof. Avoid using the camera in a location with a lot of dust, water, sand, etc. Liquids, sand and other foreign material may get into the space around the lens, buttons, etc. [. . . ] Press 3/4/2/1 to select the priority and then press [MENU/SET]. Deleting information of a registered person. Press 3 to select [YES] and then press [MENU/SET]. [PRIORITY] [DELETE] Exit the menu after it is set. Setting Auto Registration/Sensitivity Setting of Auto Registration and Sensitivity for Face Recognition can be done. 1 2 3 Select [FACE RECOG. ] from the [REC] Mode menu, and then press [MENU/SET]. (P56) Press 4 to select [SET] and then press [MENU/SET]. Press 3/4 to select the item and then press [MENU/SET]. Item [AUTO REGISTRATION] Description of settings [OFF]/[ON] When the [AUTO REGISTRATION] is set to [ON], For details, see "Auto Registration" on P121. [FACE RECOG. ] will be set to [ON] automatically. [HIGH]/[NORMAL]/[LOW] Select [HIGH] when recognition proves to be difficult. The [SENSITIVITY] likelihood of recognition increases, but so does the likelihood of mistaken recognition. Select [LOW] when mistaken recognition happens frequently. To return to the original settings, select [NORMAL]. Exit the menu after it is set. - 120 - Recording Auto Registration When [AUTO REGISTRATION] is set to [ON], the registration screen will display automatically after taking a picture of a face that has a high number of appearances. Registration screen is displayed after approximately 3 pictures. It may be extremely hard to recognise only with [AUTO REGISTRATION], so register the face images with [FACE RECOG. ] in the [REC] Mode menu beforehand. Registering from the automatic registration screen 1 Press 3 to select [YES] and then press [MENU/SET]. [s] S [SHARPNESS] Decreases the difference between the brightness and the darkness in the picture. [r] The picture is sharply defined. [r] The colours in the picture become vivid. [s] The colours in the picture become natural. [r] [s] The noise reduction effect is enhanced. Picture resolution may deteriorate slightly. You can obtain pictures with higher resolution. [SATURATION] [NOISE REDUCTION] Registered settings are memorised even if the camera is turned off. If you adjust the picture quality, [_] is displayed beside the Photo Style icon on the Selecting [MONOCHROME] will change the colour tone through [SATURATION]. Picture quality cannot be adjusted in the Intelligent Auto Mode and the Scene Mode. Press 4 to select [Custom setting] and then press [MENU/SET]. Setting can be registered in [CUSTOM]. screen. 3 Note In Photo Style, the camera may do something equivalent to pull processing or push processing to create a picture with particular characteristics. The shutter speed may become very slow at this time. [ASPECT RATIO] This allows you to select the aspect ratio of the pictures to suit printing or the playback method. [. . . ] A red lamp sometimes turns on when the shutter button is pressed halfway. In dark places, the AF Assist Lamp (P140) lights red to make it easier to focus on a subject. Is [AF ASSIST LAMP] on the [CUSTOM] menu set to [ON]?(P140) The AF Assist Lamp does not turn on in bright places. [. . . ]