User manual PANASONIC LUMIX DMC-SZ8EB

[. . . ] VQT5G64~EB_mst. fm 1 ページ ２０１４年２月２８日　金曜日　午後６時５３分 [ENGLISH] Basic Operating Instructions Digital Camera Model No. • The battery is not charged when the camera is shipped. • Charge the battery only when it is inserted in the camera. • Do not remove or damage the external label on the battery. • The battery is a rechargeable lithium ion battery. [. . . ] • Use only the recommended accessories. • Do not repair this unit by yourself. Refer servicing to qualified service personnel. The socket outlet shall be installed near the equipment and shall be easily accessible.          Q. MENU MODE : Monitor ; [MODE] button < [MENU/SET] button = [(] (Playback) button > Motion picture button ?Charging lamp Wi-Fi® connection lamp @ Strap eyelet A [AV OUT/DIGITAL] socket B [Wi-Fi] button C Cursor buttons 3(È)/4(DISP. )/2(ë)/1(‰) D [Q. MENU] button [ ] (Delete) button [ ] (Cancel) button • When recording to the built-in memory, [Rec Quality] is fixed to [QVGA]. • Motion pictures can be recorded continuously for up to 15 minutes. Also, continuous recording exceeding 2 GB is not possible. Remaining time for continuous recording is displayed on the screen. 3(È) The exposure compensation setting screen is displayed. Each time this is pressed, the display on the monitor is switched. Recordable Recordable time Guideline pictures 5 R1m10s ∫ About zooming while recording motion pictures • The Extra Optical Zoom and Intelligent Zoom cannot be used during the motion picture • If you use Extra Optical Zoom or Intelligent Zoom, the angle of view may change drastically recording. when you start or finish recording a motion picture.    ∫ Product identification marking Product Digital Camera Bottom Location  4(DISP. ) • The guideline is used for balancing the composition. (This is not displayed during 2(ë) playback) The Self-Timer setting screen is displayed. [ ]([10sec. ])/[ ]([2sec. ])/[OFF] The flash setting screen is displayed. [‡]([Auto])/[ ]([iAuto])/[ ]([Auto/Red-Eye])/[‰]([Forced Flash On])/ [ ]([Slow Sync. /Red-Eye])/[Œ]([Forced Flash Off]) The menu screen is displayed. This operation is also available during playback. ∫ About the AC adaptor (supplied) CAUTION!To reduce the risk of fire, electric shock or product damage, • When the mode has been switched from Playback Mode to Recording Mode, the previously set Recording Mode will be set. 1(‰) • Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. • The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.    E Tripod mount F Speaker  G Card/Battery door H Release lever VQT5G64~EB_mst. fm 2 ページ ２０１４年２月２８日　金曜日　午後６時５３分 Playback [(] (Playback) button Connecting to a smartphone/tablet • Use this to play back pictures. Using the QR code to set up a connection (If you are using an iOS device [iPhone/iPod touch/iPad]) Controlling the camera with the smartphone/tablet ∫ Recording images with the smartphone/tablet (remote recording) 5 Select the connection method. Example: Selecting [WPS (Push-Button)] to set up a connection 1 2 Connect to a smartphone/tablet. Select [ ] on the screen of “Image App”. When recording pictures or half-pressing the shutter button, reddish stripes may appear on the monitor. Alternatively, part or all of the monitor may turn a reddish colour. Shutter system Shutter speed Exposure (AE) Metering mode Monitor Microphone Speaker Recording media Recording file format Still Picture Motion pictures Interface Digital 100-0001 1/ 5 1 Cursor buttons Press and hold [Wi-Fi], and release it after the Wi-Fi connection lamp lights up. • The recorded images are saved in the camera. • Motion pictures cannot be recorded. 1 Select [Via Network]. [. . . ] When this occurs, 2 3 4 turn on this unit again. On the smartphone/tablet, start “Image App”. Using “Image App”, scan the QR code displayed on the screen of the camera. You can send pictures and motion pictures recorded with this unit to a PC. The connection methods described in this manual are examples. For details on other connection methods, refer to “Operating Instructions for advanced features (PDF format)”. Preparations: • If the workgroup of the destination PC has been changed from the standard setting, you also need to change the setting of this unit in [PC Connection]. 2 3 Press 3/4 to select [PC], and then press [MENU/SET]. [. . . ]