User manual PANASONIC DMC-TZ40GA WI-FI CONNECTION GUIDE

[. . . ] Preparation: You may be required to configure settings on applicable devices depending on the connecting device or WEB service. Digital Camera Model No. DMC-TZ40 / DMC-ZS30 VQC9329 The camera cannot be used to connect to a public wireless LAN connection. Wi-Fi® connection guide Linking with the Wi-Fi compatible equipment allows you to remotely operate the camera, or share pictures with people in distant places even during recording or playing back. You can remotely operate the camera using a smartphone/tablet. [. . . ] • This function can be used with NFC compatible devices with Android (2. 3. 3 or above). (Not available in certain models) ■ Operating this unit Press the [Wi-Fi] button 3 Taking pictures / Playing back pictures 1 Start up “Image App” on your smartphone/tablet 2 Place your smartphone/tablet to the side of this unit Use to select [New Connection] and press [MENU/SET] Use to select [Remote Shooting] and press [MENU/SET] ■Taking pictures via a smartphone/tablet (remote recording) Select [ ] on a smartphone/tablet ■ Supported OS Android 2. 2 - Android 4. 2 iOS 4. 3 - iOS 6. 0 ■ On your smartphone/tablet Select the SSID displayed on the camera, and enter the password • The SSID displayed differs depending on the connection method. • To connect [Via Network], select a wireless access point and adjust the settings. Start up “Image App” • When the connection is complete, live images captured by the camera will be displayed on the “Image App” screen. ■ Installation procedure Connect your smartphone/tablet to the Internet, and please install “Panasonic Image App” from the following site. • “Google Play™ Store” (for Android) • “App StoreSM” (for iOS) In the search field of each site, search by entering “Panasonic Image App” to find it quickly. Place over this area (within 5 mm (0. 20 inch)) ■Playing back pictures in the camera Select [ ] on a smartphone/tablet • Do not bump your smartphone/tablet strongly against this unit. (The smartphone/tablet or this unit may get scratched) • For information on how to use NFC compatible devices, please contact the device manufacturer. • If there is no immediate reaction, slightly move the position where the smartphone/tablet was placed. ●Read the [Help] in the “Image App” menu for further details on how to ●The screen differs depending on the operating system. operate. ●The service may not be able to be used properly depending on the 3 Press to select [Yes] and press [MENU/SET] Transferring a still picture easily to your smartphone/tablet type of smartphone/tablet being used. For compatible devices, see the following support site. http://panasonic. jp/support/global/cs/dsc/ (This site is available in English only. ) ●Android and Google Play are trademarks or registered trademarks of Google Inc. ●App Store is a service mark of Apple Inc. 4 Place your smartphone/tablet over this area of the unit again • When the connection is complete, live images captured by the camera will be displayed on your smartphone/tablet. • Smartphone/tablet that have already been approved to connect can connect by performing the operations in step 1 and 2 . When transferring just 1 still picture to your smartphone/tablet with “Image App” installed, you can use the NFC function to easily send the picture. Start up “Image App” on your smartphone/ Display the still picture to be transferred Place your smartphone/tablet to the side of tablet to your smartphone/tablet on the 1-picture this unit screen (full screen) Connecting via a wireless access point / Connecting directly Press to select connection method, and then press [MENU/SET] Playback on TV You can use the Wi-Fi function [Playback on TV] to display pictures on a television that is compatible with a DLNA certified digital media renderer (DMR). [. . . ] After copying is finished, click [Close] and remove the memory card from the computer 1 To create a folder that receives images 2 Connecting to your PC • Create a PC user account (account name (up to 254 characters) and password (up to 32 characters)) consisting of alphanumeric characters. An attempt to create a receive folder may fail if the account includes non-alphanumeric characters. • Turn the computer on. [. . . ]