User manual PANASONIC LUMIX DMC-TZ5EB

[. . . ] YES NO SELECT WB SET CANCEL MENU WB RE VIE W RE VIE W SET SET · When you select [YES], the picture is overwritten. · When the original picture is protected, you cannot overwrite the trimmed picture. · Close the menu by pressing the [MENU] button 2 times after finishing the trimming. 91 Playback (advanced) Formatting the Card Preparation · Set the mode dial to [ ]. (P29) ¬Suggestions/Tips ¬ SETUP 1 Select [FORMAT]. PLAY 2/2 RESIZE TRIMMING FORMAT SELECT MENU SET WB EXIT MENU WB RE VIE W RE VIE W SET SET 2 Select [YES] to format. FORMAT DELETE ALL DETA ON THE MEMORY CARD? [. . . ] ¬Suggestions/Tips ¬ · Press the [DISPLAY] button to print the date. · Press the [MENU] button to cancel printing. · When the total number of prints becomes 255 or more, the number of remaining pictures appears as [---] on the screen. · When you set the date print setting by pressing the [DISPLAY] button, the date is printed regardless of the date print setting on DPOF setting. (P82) · When the printer does not support the date printing by DPOF setting, the date may not be printed as it is on date setting in DPOF setting. · The setting on the printer may have priority over the setting on the camera in the date print. 13 Burst (P44) 12 106 Others 1 2 3 4 5 1600 6 7 1 14 13 PLAY AUDIO 100-0001 1/19 8 9 10 F2. 8 1/25 ISO100 AUTO 11 12 10:00 1. JAN. 2004 ª In playback 1 Playback mode 2 DPOF (P78, 85) 1 (White): DPOF setting for printing 1 (Green): DPOF setting for Slide Show 1 (Green with number of prints): DPOF setting for printing and Slide Show 3 Protected picture (P83) 4 Picture with audio (P75) 5 Picture size (P61) : In Motion image mode 6 Quality (data compression ratio) (P62) 5 fps / 10 fps / 30 fps : In Motion image mode In Simple mode: : ENLARGE : 4qa6q/10a15cm : E-MAIL 7 Battery indication (P13) 8 Folder/File number 9 Page number/Total pictures 10 Histogram (P28) · It will be displayed when the [DISPLAY] button is pressed. 11 Recording information (P27) (Recording mode/Aperture indication/Shutter speed/ISO sensitivity/Flash/White balance) · It will be displayed when the [DISPLAY] button is pressed. 12 Recorded date and time 13 Audio playback (P75) PLAY MOTION : IMAGE In Motion image mode (P76) 14 Flip animation (P72) 107 Others The Menu Items ª [REC] mode menu REC 1/3 SETUP AUTO 1600 REC SETUP 1/3 OFF 2MIN. OFF 1 2 3 4 W. BALANCE PICT. SIZE QUALITY SPOT MODE SELECT SET OFF 13 14 15 16 MONITOR AUTO REVIEW POWER SAVE ECO ECONOMY SELECT SET EXIT MENU EXIT MENU 1 2 3 4 W. BALANCE (P58) PICT. SIZE (P61) QUALITY (P62) SPOT MODE (P63) REC 2/3 13 14 15 16 MONITOR (P24) AUTO REVIEW (P24) POWER SAVE (P24) ECONOMY (P25) REC SETUP 2/3 SETUP 50 100 200 5 6 7 8 SENSITIVITY AUTO AUDIO REC. AF TRIGGER D. ZOOM SELECT SET OFF OFF 17 18 19 20 BEEP NO. RESET RESET CLOCK SET SELECT SET EXIT MENU EXIT MENU 5 6 7 8 SENSITIVITY (P64) AUDIO REC. Do not use benzine, thinner or alcohol for cleaning the camera. · Before cleaning the camera, remove the battery or disconnect the AC adaptor from the electrical outlet. · The camera body may be deformed and the surface finish may peel off. · Wipe the camera with a soft, dry cloth. To remove stubborn stains, wipe with a cloth that is soaked in a detergent diluted with water and afterward finish wiping with a dry cloth. 110 Others ª Condensation When using the camera outdoors during very cold weather, condensation can form on the camera and lens when you return to a warm place. When condensation has taken place: Turn the camera off and leave the camera in this condition for about 2 hours. When the camera becomes close to the ambient temperature, the condensation disappears naturally. ª Optimal Use of the Battery The battery is a rechargeable lithium ion battery. Its ability to generate power is based upon the chemical reaction that takes place inside it. This reaction is susceptible to the surrounding temperature and humidity, and, if the temperature is too high or too low, the operating time of the battery will be shorter. If you drop the battery accidentally, check to see if the battery body and terminals are deformed. [. . . ] Unreadable language was selected by mistake. Select [ ] icon on the [SETUP] menu to set the desired language. 7: 7: 8: 8: 3: 3: The subject is not focused properly. 9-1: The focus range depends on the recording mode. Set the mode dial to the mode corresponding to the distance to the subject. [. . . ]