User manual PANASONIC DMC-ZS10

[. . . ] Basic Owner's Manual Digital Camera Model No. DMC-ZS10 Before connecting, operating or adjusting this product, please read the instructions completely. More detailed instructions on the operation of this camera are contained in "Owner's Manual for advanced features (PDF format)" in the supplied CD-ROM. Install it on your PC to read it. For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www. panasonic. com/contactinfo P VQT3G70 M0211KZ0 Dear Customer, Thank you for choosing Panasonic!You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we're sure it will bring you and your family years of enjoyment. [. . . ] · Rotating the zoom lever from Tele to Wide or vice versa in every recording. · Turning the camera off every 10 recordings and leaving it until the temperature of the battery decreases. The number of recordable pictures or available operating time may vary according to surrounding environment and usage conditions. Figures may be reduced if flash, zoom, or other functions are used frequently, or in colder climates. (ENG) VQT3G70 13 Inserting and removing the card (optional)/the battery Set the camera ON/OFF switch to OFF and slide the release lever ( ) to [OPEN] before opening the lid [OPEN] [LOCK] Insert the battery and card, making sure that their orientation is correct Battery: Insert all the way firmly until a locking sound is heard, and check that the lever is hooked over the battery. Card: Insert all the way firmly until it clicks. Close lid Slide to the [LOCK] position. To remove · To remove battery: move lever in direction of arrow. · To remove card: press down in center. Lever Always use genuine Panasonic batteries (DMW-BCG10PP). If you use other batteries, we cannot guarantee the quality of this Insert the card fully, otherwise it may be damaged. product. 14 VQT3G70 (ENG) The built-in memory can be used as a temporary storage device when the card being used becomes full. time for a card. Picture save destination (cards and built-in memory) Built-in memory (approx. 18 MB) The access time for the built-in memory may be longer than the access Compatible memory cards (optional) Type of Card Capacity SD 8 MB ­ 2 GB Memory Cards SDHC 4 GB ­ 32 GB Memory Cards SDXC 48 GB, 64 GB Memory Cards The following SD standard-based cards (Panasonic brand recommended) Notes · Using a card of SD speed "Class 4"* or above is recommended for recording motion pictures in [AVCHD]. Using a card of SD speed "Class 6"* or above is recommended for recording motion pictures in "MOTION JPEG". · Can be used with devices compatible with the respective formats. · Before using SDXC Memory Cards, check that your computer and other devices support this type of card. http://panasonic. net/avc/sdcard/information/SDXC. html · Only the cards listed on the left with the given capacities are supported. * D speed class refers to a specification for sustained write speeds. S Confirm the SD speed by checking the card label or other card related materials. (Example) Latest information: http://panasonic. jp/support/global/cs/dsc/ (This Site is English only. ) Keep the Memory Card out of reach of children to prevent swallowing. (ENG) VQT3G70 15 Setting the clock The clock is not set when the camera is shipped. Turn on the power ( ) Press [MENU/SET] ( ) while the message is displayed Press to select the items (year, month, day, hour, minute, display order or time display format), and press to set · To cancel Press [ / ]. Press [MENU/SET] Confirm the setting and press [MENU/SET] · To return to the previous screen, press [ / ]. Press to select [Yes] and press [MENU/SET] if automatically correcting time of day using the GPS function · To manually set date and time select [No]. 16 VQT3G70 (ENG) When [Please set the home area] is displayed, press [MENU/SET] Press to set your home area and press [MENU/SET] The current time and home area are set. · Turn on power again and check the time display. To change the time setting Select [Clock Set] from [Rec] or [Setup] menu, perform and . About GPS When GPS is used, the camera performs the following functions. · Records location name information and the latitude and longitude for the positioned location on the recorded pictures · Corrects automatically to the current time When [GPS Setting] is [ON], the GPS function works even if the camera's power is off. · Electromagnetic waves from the camera can affect instruments and meters. During airplane takeoff and landing or in other restricted area, set [GPS Setting] to [OFF] or , then turn the camera's power off. · When [GPS Setting] is [ON], power will drain from the battery even if the camera's power is OFF. (ENG) VQT3G70 17 Setting the menu Refer to the following procedures to operate the menus. Example: Setting [AF Mode] from to in the [Program AE] Mode Press [MENU/SET] to display the menu Switching to the [Rec] menu Select [Rec], and press [MENU/SET]. · The menu type can also be selected by touch operations. Press to select [AF Mode] and then press [MENU/SET] · Depending on the item, its setting may not appear or it may be displayed in a different way. Press to select and then press [MENU/SET] to set Press [ / ] several times to close the menu 18 VQT3G70 (ENG) Selecting the Recording Mode Turn on the power ( ) Slide the [REC/PLAY] switch ( ) to Switch the mode by rotating the mode dial ( ) [Intelligent Auto] Mode [Program AE] Mode Take pictures with automatic settings. The subjects are recorded using your own settings. [Aperture-Priority] Mode [Shutter-Priority] Mode The shutter speed is automatically determined by the aperture value you set. The aperture value is automatically determined by the shutter speed you set. [Manual Exposure] Mode [Custom] Mode The exposure is adjusted by the aperture value and the shutter speed which are manually adjusted. [. . . ] IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God. 32 VQT3G70 (ENG) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY COVERAGE". [. . . ]