User manual PANASONIC DMP-BD30

[. . . ] Operating Instructions Blu-ray Disc Player Model No. DMP-BD30 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. [. . . ] (The logo shown on the left is not displayed on items may not be output the equipment. ) (e. g. , when a television is connected, the HDMI audio DTS-HD output of this unit is limited to down-mixed 2ch. ) On: The primary audio and secondary audio are mixed and output. The BD-Video Secondary Audio [BD-V] sampling frequency is converted to 48 kHz. Turn on/off the clicking sound on the menu and audio with secondary video in picture-in-picture mode. ( 13) Off: The clicking sound on the menu and secondary audio are not output. PCM Down Conversion On: Signals are converted to 48 kHz. (Choose when the connected Select how to output audio with a sampling frequency of 96 kHz. equipment cannot process signals with sampling frequency of Signals are converted to 48 kHz despite the settings across in 96 kHz. ) the following cases: Off: Signals are output as 96 kHz. (Choose when the connected ­ when the signals have a sampling frequency of over 96 kHz equipment can process signals with sampling frequency of 96 kHz. ) ­ when the disc has copy protection ­ when "BD-Video Secondary Audio" is set to "On" [Note] Regarding Dolby Digital Plus/TrueHD, DTS-HD The settings described in the shaded area are recommended to output the high specification audio of Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio as the original format. Settings of "Digital Audio Output" Connected terminal Audio formats are output as: HDMI AV OUT terminal "Bitstream" is selected. Dolby Digital§2 "BD-Video Secondary Audio" is set to "On". DIGITAL AUDIO OUT terminal The original format HDMI AV OUT terminal§1 "Bitstream" is selected. Dolby Digital or DTS Digital Surround "BD-Video Secondary Audio" is set to "Off". DIGITAL AUDIO OUT terminal (depending on the original format) HDMI AV OUT terminal Down-mixed 5. 1ch PCM "PCM" is selected. "BD-Video Secondary Audio" setting is either "On" or "Off". DIGITAL AUDIO OUT terminal Down-mixed 2ch PCM §1In the following cases, audio is output as Dolby Digital or DTS Digital Surround. ­ The connected device does not support Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio. ­ Since multiple devices are connected using HDMI cables, operations on the device are restricted. §2When playing BD-Video without secondary audio or clicking sound, the audio is output as the same format as if "BD-Video Secondary Audio" was set to "Off". Regarding 7. 1ch LPCM The settings described below are recommended to output as the original format. ­ Connect the unit with the HDMI AV OUT terminal. §3 ­ Set "BD-Video Secondary Audio" to "Off". (Otherwise down-mixed 5. 1ch PCM will be output from the HDMI AV OUT terminal. ) §3Down-mixed 2ch PCM is output from the DIGITAL AUDIO OUT terminal, regardless of the "BD-Video Secondary Audio" setting. "Display" tab Status Messages Choose whether to show status messages automatically. On-screen Language Choose the language for these menus and on-screen messages. [. . . ] 5, 16, 29 N Noise reduction (NR) Integrated NR . 22, 29 Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. Manufactured under license from Dolby Laboratories. [. . . ]