User manual PANASONIC DMP-UB900EB

[. . . ] DMP-UB900_EB-SQT1293. book 1 ページ ２０１６年３月７日　月曜日　午後３時３７分 Operating Instructions Blu-ray DiscTM Player Model No. DMP-UB900 Firmware updates Panasonic is constantly improving the unit’s firmware to ensure that our customers are enjoying the latest technology. Panasonic recommends updating your firmware as soon as you are notified. For details, refer to “Firmware updates” ( 18) or http://panasonic. jp/support/global/cs/ (This site is in English only. ) Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. [. . . ] ∫ Bandwidth Limitation Adjust the bandwidth limitations. ∫ Dynamic Range Conversion Adjustment When connected to a TV that does not support HDR (High Dynamic Range), this unit outputs normal dynamic range signals that are converted from HDR image signals. In this case, set the maximum image contrast. If you set a smaller value, their contrast will be reproduced more faithfully, but the entire screen will appear darker. To increase the brightness, set a larger value. ∫ 24p / 25p Conversion Play back videos with film-like motion. ≥ When this unit is connected to a TV compatible with 4K/24p or 4K/25p: If “Video Format” ( 29) is set to “Automatic”, videos will be output in 4K/24p or 4K/25p. ≥ When this unit is connected to a TV compatible with 1080/24p or 1080/25p: If “Video Format” ( 29) is set to “Automatic”, “1080i” or “1080p”, videos will be output in 1080/24p or 1080/25p. ≥ Noise may appear on the image when you switch the setting. ∫ Progressive Select the method of conversion for progressive output to suit the type of material being played. ≥ If the video is disrupted when “Auto” is selected, select either “Video” or “Film” depending on the material to be played back. ∫ Reset to Default Picture Settings Return “Picture Settings” of the selected tab (“Set 1” or “Set 2”) to the factory preset. These settings are also displayed by pressing [PICTURE SETTING]. Picture Settings Set 1 Display Picture Type Sharpness Adjustment ent t Noise Reduction Normal Luminance/Colour Adjustment Bandwidth Limitation n 24p / 25p Conversion n Progressive During BD-Video playback, these icons switch to the ones for BD Video content. Normal Off Auto Reset to Default Picture Settings ture r Set 1 Switch “Set 1”, “Set 2” or “Standard” by using [2, 1]. ≥ You can register desired settings to “Set 1” and “Set 2”. Settings for BD Video playback and settings for the playback of other types of media are registered separately. (The default settings for “Set 1”/”Set 2” are the same as the settings for “Standard”. ) ≥ You cannot change the “Standard” settings. ∫ Display Select a setting suitable for your screen. ∫ Picture Type Select the picture quality mode during play. ∫ Sharpness Adjustment Adjust the sharpness of images. The greater the value is, the sharper images will be. SQT1293 27 Playback Picture Settings DMP-UB900_EB-SQT1293. book 28 ページ ２０１６年３月７日　月曜日　午後３時３７分 Sound Effect Settings ∫ Sound Effects*1, *2 Select the sound effect. This setting is also able to switch by pressing [SOUND EFFECT]. ≥ Night Surround : Enjoy a movie with powerful sound even when the volume is kept low at night. The audio is set in such a way that it can be heard easily. [. . . ] This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software licensed under the GNU General Public License, Version 2. 0 (GPL V2. 0), (4) the software licensed under the GNU LESSER General Public License, Version 2. 1 (LGPL V2. 1), and/or (5) open source software other than the software licensed under the GPL V2. 0 and/or LGPL V2. 1. The software categorized as (3) - (5) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Please refer to the detailed terms and conditions thereof shown in the Player Settings menu. At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2. 0, LGPL V2. 1 or the other licenses with the obligation to do so, as well as the respective copyright notice thereof. [. . . ]