User manual PANASONIC DMR-EH55

[. . . ] Operating Instructions DVD Recorder Region number supported by this unit Region numbers are allocated to DVD players and DVD-Video according to where they are sold. The region number of this unit is "3". The unit will play DVD-Video marked with labels containing "3" or "ALL". Example: The illustration shows the model for Australia and N. Z. 3 ALL 2 3 4 Playing back Reference Convenient functions Copying Editing For Australia and N. Z. The region number of this unit is "4". The unit will play DVD-Video marked with labels containing "4" or "ALL". [. . . ] See also the notes "Before copying" ( 46). 6 Register titles and playlists for copy. If you are going to copy a registered list without making any changes to it ( step 7). 1 Press [3, 4] to select "Create List" and press [1]. Copy Cancel All Destination Capacity: 4343MB Size: 0MB ( 0%) HDD > DVD 2 Copy Mode VIDEO High Speed 3 Create List Page 01/01 1 2 3 Start Copying ENTER Create copy list. While stopped S SUB MENU RETURN Press [FUNCTIONS]. Press [3, 4] to select "To Others" and press [ENTER]. Press [3, 4] to select "Advanced Copy" and press [ENTER]. Copy Cancel All 2 Press [3, 4] to select "New item" and press [ENTER]. 3 Press [A] to select "VIDEO" or press [B] to select "Playlists". Create List HDD 007 008 0:30(XP) A VIDEO --- B Playlists ARD 10. 10. SAT ----- Previous ENTER RETURN Page 02/02 Next Next S SUB MENU Select Previous 1 Copy Direction HDD > DVD Source Destination HDD DVD 2 Copy Mode VIDEO High Speed 0 3 Create List Start Copying ENTER RETURN 4 Press [3, 4, 2, 1] to select the titles or playlists and press [ENTER]. When copying to a disc using high speed mode, [-R] [-R]DL] [-RW<V>] : only items indicated with " " " can be registered. " or Select the copy direction. If you are not going to change the registered list press [4] several times ( step 7). 4 Set the copy direction. If you are not going to change the copying direction, press [4] ( step 5). 1 Press [3, 4] to select "Copy Direction" and press [1]. 2 Press [3, 4] to select "Source" and press [ENTER]. 3 Press [3, 4] to select the drive and press [ENTER]. 4 Press [3, 4] to select "Destination" and press [ENTER]. 5 Press [3, 4] to select the drive and press [ENTER]. The same drive as the copy source cannot be selected. 6 Press [2] to confirm. [+R] [+R]DL] [+RW] : only items indicated with " " can be registered. To select a multiple number of items together, press [;] to add the check mark and press [ENTER] ( below, Multiple editing). To show other pages ( below) To edit the copying list ( 48) You can register a multiple number of titles and playlists on the copying list by repeating steps 2­4. You cannot start copying when the value of the "Size" ( 48) exceeds 100% ("Destination Capacity" is not sufficient). 5 Press [2] to confirm. 5 Set the recording mode. If you are not going to change the recording mode, press [4] ( step 6). 1 Press [3, 4] to select "Copy Mode" and press [1]. 2 Press [3, 4] to select "Format" and press [ENTER]. 3 Press [3, 4] to select "VIDEO" and press [ENTER]. [. . . ] Check the source carefully when setting the unit up on a ship or other place where DC is used. Service Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these instructions occurs, disconnect the AC mains lead and contact your dealer or an authorized service centre. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons. Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time. AC mains lead protection Ensure the AC mains lead is connected correctly and not damaged. [. . . ]