User manual PANASONIC DMR-E60P

[. . . ] ® DVD VIDEO RECORDER Operating Instructions Model No. DMR-E60 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. Region number supported by this unit Region numbers are allocated to DVD players and software according to where they are sold. [. . . ] If the space on the copying drive runs out or the number of files/folders to be copied exceeds the maximum, copying will stop partway through. If no title has been entered for the folder at the copying drive, the title from the copying source will be entered. It is recommended that the title is entered at the copying source. After copying, it may take some time to download the copying source information. Print (DPOF) number setting ( page 36) is not transferred. ENTER RETURN All copy of the card FUNCTIONS RETURN [SD/CARD] # [RAM] You can copy the whole contents of the memory card to DVD-RAM. (maximum of 300 folders, 3000 files) JPEG ALL COPY ALL COPY OF THE CARD Copy from SD card Copy to \JPEG\DCIM001 SD card DVD To insert/remove the SD/PC card ( page 18) When the "SD" or "CARD" indicator in the unit display is flashing, the card is being read from or written to. Do not turn off the power or remove the card. Such action may result in malfunction or loss of the card's contents. Copy all JPEG from the card. All copy RETURN Cancel [Note] To stop set up process Press [RETURN]. You can also use [3, 4, 2, 1] to select "Cancel" or "No" and press [ENTER]. A new folder will be created in the copying drive. All compatible files in the folder are copied even if not still pictures. Folders lower than the folder to be copied will not be copied. If the space on the copying drive runs out or the number of files/folders to be copied exceeds the maximum, copying will stop partway through. After copying, it may take some time to download the copying source information. Print (DPOF) number setting ( page 36) is not transferred. [Note] You can only perform operations for "INPUT", "Album" and "Slide Show" if the card is set to Write Protect ([SD/CARD] page 11) or Folder Protect ([SD/CARD] [RAM] page 36) or if Disc Protection ([RAM] page 38) or Cartridge Protection is activated ([RAM] page 10). Deactivate the protection to access other items. Erase, Protect, Print (DPOF) page 36 Settings page 19, "To change the display timing" page 36, "Format" 34 RQT6981 Press [2] and [3, 4] to select the drive and press [1]. [Note] Press [3, 4] to select still picture's folder and press [ENTER]. To enter the folder's title After selecting the still picture's folder, press [1] to select "Folder Title" and press [ENTER]. (page 27, Entering text) You can enter up to 36 characters. Folder titles entered using this unit will only be displayed using this unit. Folders entered using this unit are written to the TITLE. DVD file. If there is not enough space for the entry or if the limit for the number of files has been exceeded (page 11, Still pictures), the title cannot be entered. "Picture" and "File" refer to numbers inside the folder selected. If there is more than one upper folder, pressing [:], [9] will switch between them ( page 11, Still picture folder structure). A check mark appears on the still picture. 0001 Press [3, 4, 2, 1] to select "Copy" and press [ENTER]. A confirmation screen appears. Select the copying drive. ( below) Press [3, 4, 2, 1] to select "Copy" and press [ENTER]. Copying of still pictures begins. Repeat this if you select more than one still picture. To select still pictures one by one Press [3, 4, 2, 1] to select a still picture and press [ENTER]. (A check mark appears on the still picture. ) To erase check marks Press [3, 4, 2, 1] to select the folder or still picture with the check mark and press [ENTER]. To select all the still pictures in the folder Press [3, 4, 2, 1] to select "Folder" and press [ENTER]. [. . . ] El mensaje "Posicion Memorizada" aparece en el televisor. 2 Después de pasar el aparato a la posición de modo en espera y de volver a ponerlo en funcionamiento Pulse [1] (PLAY). La reproducción se inicia desde la posición memorizada. (La posición se cancela). Visualización del televisor durante la grabación [RAM] [DVD-R] Las imágenes siendo grabadas no se ven afectadas. [. . . ]