User manual PANASONIC DMR-E95HPS

[. . . ] Operating Instructions DVD Video Recorder Model No. DMR-E95H Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. The warranty can be found on page 61. [. . . ] To stop recording Press []. Manual recording [HDD] [RAM] [DVD-R] Preparation Connect a video cassette recorder to this unit's input terminals. Press [HDD] or [DVD] to select the recording drive. [Note] Only one piece of DV equipment (e. g. , digital video camcorder) can be connected to the unit via the DV input terminal. It is not possible to operate the unit from the connected DV equipment. The DV input on this unit is for use with DV equipment only. (It cannot be connected to a computer, etc. ) The DV equipment name may not be shown correctly. Depending on the DV equipment, the images or audio may not be input properly. The date and time information on the tape of the DV equipment will not be recorded. You cannot record and play simultaneously. If the DV automatic recording function does not work properly, check the connections and DV equipment settings, and turn the unit off and back on. If that does not work, follow the instructions for manual recording ( left). [Note] When recording using this unit's input terminals, only the sound received at the time of recording will be recorded. As long as secondary audio that is recorded on the video cassette is not output on the unit in play, it is not recorded. 1 While stopped Press [INPUT SELECT] to select the input channel for the equipment you have connected. e. g. , If you have connected to L2 input terminals, select "L2". 2 Press [REC MODE] to select the recording mode. 41 Transferring (dubbing) still pictures HDD 1 4 7 CANCEL DVD 2 5 8 0 3 SD/PC PAGE SD/PC To register on a folder by folder basis 1 Press [3, 4] to select "Picture/Folder" and press [ENTER]. Dubbing Create a dubbing list. Picture Picture/Folder Space on destination: 4343MB Name No. Capacity New entry Cancel all CH 6 AUDIO 9 VCR Plus+ CM SKIP SLOW/SEARCH 1 Dubbing direction SD card > DVD 2 Mode Picture High Speed :9 ; SKIP STOP PAUSE PLAY/x1. 3 DIRECT NAVIGATOR FUNCTIONS FUNCTIONS TOP MENU ENTER SUB MENU RETURN 3421 ENTER RETURN SUB MENU [HDD] [RAM] [SD] [PC] 2 Press [3, 4] to select "Folder" and press [ENTER]. 3 Press [3, 4] to select "New entry" and press [ENTER]. 4 Press [3, 4] to select the folder and press [ENTER]. To select a multiple number of items together, press [;] to add the check mark and press [ENTER] ( below, Multiple editing). To show other pages ( below) To switch another higher folder ( below) To edit the transferring (dubbing) list (· below) Still pictures and folders cannot be registered on the same list. PROG/CHECK DISPLAY TIME SLIP TV GUIDE 6 7 Transfer (Dubbing) Transferring (dubbing) using the transferring (dubbing) list Press [3, 4] to select "SET" and press [ENTER]. The transferring (dubbing) list is registered. 1 2 While stopped Press [3, 4] to select "Start dubbing" and press [ENTER]. For individual still pictures only When specifying another folder as the transferring (dubbing) destination, select "Folder". \JPEG\DCIM001 Press [FUNCTIONS]. Press [3, 4, 2, 1] to select "DUBBING" and press [ENTER]. Dubbing Cancel all Select the dubbing direction. Folder New folder 001 002 003 ----100__DVD 101__DVD 102__DVD New folder Make a new folder and dub to it? 1 Dubbing direction SD card > HDD Source Destination SD card HDD Press [2, 1] to select "Yes" and press [ENTER] to start transferring (dubbing). To stop transferring (dubbing) Press and hold [RETURN] for 3 seconds. To return to the previous screen Press [RETURN]. 2 Mode Picture High Speed 3 Create list 0 If you are not going to change the registered list press [4] several times ( step 7). 3 Press [3, 4] to select "Dubbing direction" and press [1]. 1 2 3 4 Press [3, 4] to select "Source" and press [ENTER]. Press [3, 4] to select the drive and press [ENTER]. Press [3, 4] to select "Destination" and press [ENTER]. [. . . ] Pulse de nuevo para mostrar las imágenes de reproducción y grabación. ­Si la información es correcta, seleccione "Yes, end setup (Sí, finalice la preparación)" y pulse [ENTER]. ­Si la información no es correcta, seleccione "No, repeat setup process (No, repita el proceso de preparación)" y pulse [ENTER] para iniciar de nuevo el ajuste. Una vez confirmado el contenido introducido aparece la pantalla siguiente. What would you like to do now? Watch TV 3 Pulse [ENTER]. Se muestra una pantalla de recepción de televisión o una pantalla con fondo azul. [. . . ]