User manual PANASONIC DMR-XS385

[. . . ] Operating Instructions DVD Recorder Model No. DMR-XS385 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. [. . . ] Select "Yes", then press [OK] to start copying. ] for 3 seconds. 2 3 Select "Copy Video ( AVCHD )", then press [OK]. Select the title, then press the "Yellow" button. A check mark is displayed. Press the "Yellow" button again to cancel. (All the recordings on the same date become a title. ) To stop copying Press and hold [RETURN 4 Press [OK]. You cannot playback SD Video on an SD card or in the HDD of the Panasonic video camera, etc. You must copy the files to the HDD or a DVD-RAM. You cannot playback or record while copying SD Video. 65 VQT2J59 Conve nient functio ns VIERA Link functions/Q Link functions What is VIERA Link "HDAVI Control"? VIERA Link "HDAVI Control" is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) or receiver under "HDAVI Control". You can use this function by connecting the equipment with the HDMI cable. See the operating instructions for connected equipment for operational details. Preparation 1 Connect this unit to your TV or receiver using an HDMI cable. ( 14) 2 Set "VIERA Link" to "On" ( 82). (The default setting is "On". ) 3 Set the "HDAVI Control" operations on the connected equipment (e. g. , TV). Set the input channel on the VIERA to suit the terminal to be used as "HDAVI Control". 4 Turn on all "HDAVI Control" compatible equipment, then select this unit's input channel on the connected TV so that the "HDAVI Control" function works properly. Also when the connection or settings are changed, repeat this procedure. Automatic input switching Power on link (VIERA]Link) (Q]Link) When the following operations are performed, the TV will automatically switch the input channel and display the corresponding action. Additionally when the TV is off, the TV will automatically turn on. ­ When play starts on the unit ­ When an action that uses DIRECT NAVIGATOR or FUNCTION MENU etc, is performed Power off link (VIERA]Link) (Q]Link) When you set the TV to standby mode, the unit is also automatically set to standby mode. Power off link function does not work when recording, copying, finalising etc. What is Q Link? Convenient functions Q Link is a convenient function that offers linked operations of this unit and a Panasonic TV. You can use this function by connecting the equipment with a fully wired 21-pin Scart cable. Preparation Connect this unit to your TV with a fully wired 21-pin Scart cable. For your reference The following systems from other manufacturers have similar functions to Q Link from Panasonic. For details, refer to your TV's operating instructions or consult your dealer. Q Link (registered trademark of Panasonic) DATA LOGIC (registered trademark of Metz) Easy Link (registered trademark of Philips) Megalogic (registered trademark of Grundig) SMARTLINK (registered trademark of Sony) Playing music continuously even after turning off power to the TV (VIERA]Link)§1 The following operations make it possible to keep the power of the unit on and to play music continuously. [. . . ] Because 1080i (1125i) more than doubles current TV broadcasts of 480i (525i), the detail is much clearer and creates a more realistic and rich image. 1080p In one High Definition image, 1080 (1125) scan lines pass at the same time every 1/50th of a second to create a progressive image. Since progressive video does not alternate scan lines like interlace, there is a minimal amount of screen flicker. 720p In one High Definition image, 720 (750) scan lines pass at the same time every 1/50th of a second to create a progressive image. [. . . ]