User manual PANASONIC DMW-FL580LPP

[. . . ] ???? DMW-FL580L Please read these instructions carefully before using this product, and save this manual for future use. ????????????????????? If you have any questions, visit: USA : www. Please read these instructions carefully before using this product, and save this manual for future use. 24 Information for Your Safety WARNING: To reduce the risk of fire, electric shock or product damage, ? [. . . ] Flash working range also diminishes with shutter speed. The flash displays the optimal range, which is calculated based on the guide number and camera settings. [ TTL AUTO] [ AUTO] Blinks: Out of flash working range [ MANUAL] [ [ RC] FP TTL AUTO] [ FP MANUAL] 10 VQT5F44 VQT5F44_JPN_PP_E. ?????????????????????? Control panel display [ [ SL AUTO] SL MANUAL] Control operation The flash can be fired remotely in sync with any flash fired by other units. The flash can be fired many times in succession while the shutter is open. (P12)) English [ MULTI] Button Functions Button [ ] Function Adjust flash level by up to w5 EV. This value is combined with adjustments to flash compensation made using the camera. See the operating instructions of the digital camera for operation of the digital camera during wireless flash shooting. Press the [MODE] (3) button again to turn back. (P15) Set the camera and flash to the same channel. Channel Group The camera can adjust flash settings separately for up to 3 groups; choose the group to which the flash belongs. 3 Use the flash to select the channel and group. The Firing mode, the flash adjustment, and the manual flash adjustment can be set for each group by operating the camera. Placing Wireless Flash Units Since the communication is performed with the flash emission of the camera, the flash positioning range varies with the camera. Refer to the camera operating instructions for details about the flash positioning range. Slide the lock lever in the direction opposite to that indicated by the [LOCK 1] icon (1) and slide the flash onto the stand until it clicks securely into place (2). Slide the lock lever to the [LOCK 1] position to latch the flash in place. To remove the flash, slide the latch in the direction opposite to the [LOCK 1] arrow and slide it from the stand. 2 Position the flash with the wireless sensor (A) facing the camera. We recommend using a single group of up to three remote flash units. Flash may not fire due to the angle or distance between the camera and the object. ?????????????????????? Fixing the Irradiation Angle Point the flash head at a wall or ceiling for bounce flash photography. [. . . ] The items listed are not exclusive, but for illustration only. ) ALL EXPRESS AND IMPLIED WARRANTIES , INCLUDING THE WARRANTY OF MERCHANTABILITY , ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. [. . . ]