User manual PANASONIC DP-3520

[. . . ] Software Operating Instructions (For Panasonic Printing System Ver. 6) Model No. DP-2310/3010/3510/3520/4510/4520/6010/6020 Printer Section Before operating this software, please read these instructions completely and keep these operating instructions for future reference. English Appendix Troubleshooting Troubleshooting Before Starting The following trademarks and registered trademarks are used throughout this manual: Microsoft, MS-DOS, Windows and Windows NT are registered trademarks of Microsoft Corporation in the USA and other countries. i386, i486 and Pentium are trademarks of Intel Corporation. Centronics is a registered trademark of Centronics Data Computer Corporation. [. . . ] Auto Configuration button When your machine is connected onto the network (TCP/IP), click this button to set the Options Configuration automatically. Number of Paper Trays Select the number of available paper trays if optional Paper Feed Module(s) are installed. Change Paper Tray Auto Select, when chosen, allows the paper to be fed continuously if the same size of paper is loaded in another paper tray (Auto Tray Switching). If Specified Tray is selected, the machine will stop if paper runs out in the chosen paper tray. 51 Printer Section Configuring the Printer Driver Settings Windows NT 4. 0 (Administrator) Device Options Tab (For DP-3510/3520/4510/4520/6010/6020 only) 1. Finisher Select the type of finisher if one is installed. Punch Unit Select Installed if the Punch Unit is installed. Large Capacity Paper Tray (LCT) Select Installed if the Large Capacity Paper Tray is installed. HDD Select Installed if the HDD Unit is installed. Auto Configuration button When your machine is connected onto the network (TCP/IP), click this button to set the Options Configuration automatically. Number of Paper Trays Select the number of available paper trays if optional Paper Feed Module(s) are installed. Change Paper Tray Auto Select, when chosen, allows the paper to be fed continuously if the same size of paper is loaded in another paper tray (Auto Tray Switching). If Specified Tray is selected, the machine will stop if paper runs out in the chosen paper tray. button (DP-3520/4520/6020, For USA only) Edit the URL address that will be displayed when clicking the Paper Tab (see page 68). Support Contacts (W). . . button of the 52 Configuring the Printer Driver Settings Windows NT 4. 0 (Administrator) · URL Title Enter an applicable URL title. · URL Enter the URL address to be associated to the Support Contacts (W). . . button of the Paper Tab. · Contact Enter applicable contact information (i. e. : The email address of the contact person) NOTE 1 Device Options Tab specifies device-specific settings and settings of optional devices. 53 Printer Section Configuring the Printer Driver Settings Windows NT 4. 0 (User) To change the printer settings, open the dialog box for the printer properties by performing the following steps. 1 2 3 4 Select Print in the File menu of the application. Select the printer model in the name list box. Click the Properties. . . button in the Print dialog box. The printer properties dialog box appears. Click the desired tabs of the dialog box and specify the properties. (See Note 1) (See pages 66 - 78) NOTE 1. In Windows NT 4. 0, setting properties depends on the logon account. This section describes properties to be specified by a user, upon executing a print operation in an application. See "Configuring the Printer Driver Settings (Administrator)" for details on administrator properties. (See page 45) 54 Configuring the Printer Driver Settings Windows 2000/XP (Administrator) To change the printer settings, open the dialog box for the printer properties by performing the following steps. The following printer properties dialog box appears. In Windows 2000/XP, setting the properties depends on the logon account. This section describes properties to be specified by the administrator (system manager). [. . . ] To configure your PC for the NetWare environment, follow the procedure below: 1 The machine(s) that are available on the NetWare environment are shown on the list. Select the desired machine and click the Next button. 2 Make sure that the Do not use NetWare is not selected. Select the desired NetWare mode and click the Next button. 1. Remote printer 3 Select Next the Frame button. type and click the 1. [. . . ]