User manual PANASONIC DP-C106

[. . . ] Digital Color Imaging System Operating Instructions Model No. DP-C106 Options DA-TL28C/TL26C/RM64C/RM128C/DU26C/SM112C/S27C Before operating this machine, please read these instructions completely and keep these operating instructions for future reference. TRADEMARKS/COPYRIGHTS The following trademarks and registered trademarks are used throughout this manual. Microsoft, MS-DOS, Windows, and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. i386, i486, and Pentium are either registered trademarks or trademarks of Intel Corporation. Adobe, the Adobe logo, Adobe PostScript, Acrobat, Acrobat Reader, and Acrobat logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. [. . . ] or A4 paper in the Bypass Tray and press the Start button. For directions on loading paper in the Bypass Tray, go to the Copy Features. The Auto Color Adjustment Patch Page prints out to the Top Tray. Place the Auto Color Adjustment Patch Page face down on the Document Glass. Position the magenta patches on the left-hand side of the glass. Cover the Auto Color Adjustment Patch Page with 5 sheets of white paper. The Copier/Printer begins the color adjustment process. Press the Exit button when the color adjustment is complete. Use ( ) ARROW buttons to highlight Print confirmation. LEF or A4L paper in the Bypass Tray and press the Start button. Retrieve the printout from the Top Tray and inspect it to see if an accurate color compensation has taken place. Use the ( · · ) ARROW buttons to highlight one of the following: No if the printout results are not satisfactory and to cancel the color adjustment. Yes if the printout results are satisfactory and to apply the color adjustment. 22. AutoColAdjust document typeselection is displayed on the Copier screen. AutoColAdjust document type selection is displayed on the Copier screen. To perform the color adjustment for other document types, repeat steps 8 through 20. The Administrator Menu is displayed on the Copier Screen. The Tools Main Menu is displayed on the Copier Screen. Press the Tools button to exit Tools Mode. 56 Tools Mode Detect Document Size The DP-C106 can automatically detect the size of an original if it is a certain size. The copier measures original document sizes in millimeters or in inches. For a complete list of all paper sizes the DP-C106 can automatically detect, go to the Basic Copying. Use the following procedure to set the default unit of size: 1. [. . . ] Do not shake or hit used Toner Cartridges. Wash immediately with cold water if Toner comes in contact with your skin. If Toner is found on your clothing, vacuum or brush away lightly. If moving Toner from a cold area to a warm area, allow at least one hour for the cartridge temperature to equalize. [. . . ]