User manual PANASONIC DP-C323

[. . . ] Operating Instructions (For Copier) Digital Color Imaging Systems DP-C354 / C264 Model No. DP-C323 / C263 / C213 Model No. Before operating this machine, please carefully read this manual, and keep this documentation in a safe place for future reference. (Illustration shows optional accessories that may not be installed on your machine. ) English Operating Instructions The following Operating Instruction manuals are included with this machine. Please refer to the appropriate manual and keep all manuals for future reference. [. . . ] To change to n/m (number/maximum) format, refer to Copier Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM. Make sure to select "Sort". 1 Select "Page Number". 3 Select the stamping position. To display this screen, refer to steps 1 to 4 of Basic Operation for Stamping (see page 61). The page number is printed on the bottom at the center. The page number is printed on the bottom right side. The page number is printed on the opposite side. 2 Select the orientation of the original. 4 To change the start page, or start position, select "Change". Select the orientation of the original according to the orientation of its characters (vertical direction). Select the orientation of the original according to the orientation of its characters (horizontal direction). 5 If "Change" was selected in step 4, select the starting page or number. 7 Select "OK". Chapter 2 For the following steps, refer to steps 5 to 6 in the Basic Operation for Stamping (see page 61). The page numbering starts from the first page. The page numbering starts from the second page. The page numbering starts from the third page. More Menus Features 6 Only the case of selecting "Change" in step 4, input the starting page number with " " and " ", or the keypad, and then select "OK". Starting page number can be set from1 to 999. Each time it is selected, the number increments by 1. Each time it is selected, the number declines by 1. For the following steps, refer to steps 5 to 6 in the Basic Operation for Stamping (see page 61). 63 Issue Number The original can be copied, and printed in consecutive numbers from 001 to 999. Chapter 2 More Menus Features 64 The issue numbers can be set from 001 to 999. After 999, the number returns to 001. 1 Select "Issue Number". 3 Select the stamping position of issue number. To display this screen, refer to steps 1 to 4 of Basic Operation for Stamping (see page 61). 2 The issue number is printed on the bottom at the center. The issue number is printed on the bottom right side. The issue number is printed on the top opposite side. Select the orientation of the original. Select the orientation of the original according to the orientation of its characters (vertical direction). Select the orientation of the original according to the orientation of its characters (horizontal direction). 4 Input the starting number of the issue number with " " and " ", or the keypad, and then select "OK". Chapter 2 More Menus Features Each time it is selected, the number increments by 1. Each time it is selected, the number declines by 1. For the following steps, refer to steps 5 to 6 in the Basic Operation for Stamping (see page 61). 65 Date The original can be copied with a printed date. The date is printed in MM/DD/YYYY format. Chapter 2 1 Select "Date". 08/01/2006 08/01/2006 3 Select the stamping position of the date stamp. More Menus Features 66 To display this screen, refer to steps 1 to 4 of Basic Operation for Stamping (see page 61). 2 The date is printed on the bottom at the center. The date is printed on the bottom right side. The date is printed on the opposite side. Select the orientation of the original. 4 Select the orientation of the original according to the orientation of its characters (vertical direction). Select the orientation of the original according to the orientation of its characters (horizontal direction). To change the date, follow the steps below. 1 Select "Change". The cursor is displayed. 2 Move the cursor to the desired position using and . Chapter 2 3 Update the date with the Keypad. More Menus Features 5 Select "OK". For the following steps, refer to steps 5 to 6 in the Basic Operation for Stamping (see page 61). 67 Text Stamp The original can be copied with printed text. Chapter 2 Up to 32 characters, including A to Z, a to z, 0 to 9, symbols, @, . The font size is 2. 1 mm x 3. 1 mm. More Menus Features 68 1 Select "Text Stamp". 3 Select the stamping position of the text stamp. To display this screen, refer to steps 1 to 4 of Basic Operation for Stamping (see page 61). 2 The text stamp is printed on the bottom at the center. The text stamp is printed on the bottom right side. The text stamp is printed on the opposite side. Select the orientation of the original. 4 Select the orientation of the original according to the orientation of its characters (vertical direction). Select the orientation of the original according to the orientation of its characters (horizontal direction). Select "Change". 5 Input text, and then select "OK". Chapter 2 More Menus Features Up to 32 characters. For instructions on how to enter characters, refer to Using the Keyboard in the Operating Instructions (For Function Parameters) on the provided CD-ROM. 6 Select "OK". For the following steps, refer to steps 5 to 6 in the Basic Operation for Stamping (see page 61). 69 Centering The copying image can be centered automatically on selected paper. Chapter 2 This function can be selected when the original is placed on the platen. [. . . ] 57 Z Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52, 56, 58, 81, 92, 93 Zoom / Effects . . . . . . . . . . . . . . . . . . . . . . 52, 54, 56, 58, 59, 61, 70, 71 Zoom Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Zoom/Type Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]