User manual PANASONIC DP-MB300EU

[. . . ] Quick Reference Guide Multi-Function Printer Model No. DP-MB300 Do NOT connect the unit to a computer with the USB cable until prompted by the MultiFunction Station (CD-ROM). 1 2 Accessory information: To ensure that the unit operates properly, we recommend the use of Panasonic toner cartridge and drum cartridge. Replacement accessory ­ Toner cartridge ­ The supplied Setup CD-ROM provides the Operating Instructions in PDF format with a detailed description on how to use the unit. Adobe® Reader® is required to view them. Please read before using the unit and save for future reference. You can select English, German, Spanish or Portuguese for the language. [. . . ] If the telephone line cord plug becomes wet, immediately pull it from the telephone wall socket, and do not use. Unplug this unit from power outlets and refer servicing to an authorised service centre when any of the following conditions occur: L If the power cord is damaged or frayed. L If liquid has been spilled into the unit. L If the unit has been exposed to rain or water. L If the unit does not work normally by following the operating instructions. Adjust only controls covered by the operating instructions. Improper adjustment may require extensive work by an authorised service centre. L If the unit has been dropped or physically damaged. L If the unit exhibits a distinct change in performance. USB cable/LAN cable To assure continued emission limit compliance; ­ use only shielded USB cable (Example: Hi-Speed USB 2. 0 certified cable). ­ use only shielded LAN cable (category 5 straight cable). Installation and relocation After moving the unit from cold areas to warmer areas, wait approximately 30 minutes before turning on the power switch to allow the unit to adjust to the ambient temperature. If the power switch is turned on too soon after a sudden climate change, condensation may form inside the unit, causing malfunction. Never turn the unit upside down or sideways when moving it. Never install telephone wiring during a lightning storm. Never install telephone sockets in wet locations unless the socket is specifically designed for wet locations. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines. Do not position the unit in a location where it is unstable or subject to vibrations. Laser radiation CLASS 1 LASER PRODUCT The printer of this unit utilises a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. See the operating instructions for the Laser diodes properties. LED light CLASS 1M LED PRODUCT Do not view directly with optical instruments. See the operating instructions for the LED light of CIS properties. Detailed operating instructions are on the CD-ROM. 5 1. Important Information Fuser unit During or immediately after printing, the fuser unit gets hot. Note: L The area near the recording paper exit may also get warm. [. . . ] This machine is supplied with a one year swap out warranty. Please retain your Proof of Purchase and Packaging in the unlikely event that your machine should require attention. For further information, please contact following: - For UK: 0844 844 3878 (for fax machine) / 0844 844 3867 (for MFP) - For the Republic of Ireland: 01 6130082 (for fax machine) / 01 2898255 (for MFP) In addition you can visit our web site at www. panasonic. co. uk This warranty is in addition to and does not in any way affect any statutory or other right of consumer purchasers. This warranty relates only to product used within Mainland Great Britain, please refer to your dealer warranty information relating to use elsewhere within the United Kingdom and Ireland. [. . . ]