User manual PANASONIC DVD-LS850

[. . . ] Operating Instructions Portable DVD/CD Player Model No. DVD-LS80 DVD-LS82 DVD-LS850 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. [. . . ] 10. 2 1 / 17 2:21 ENTER : All By Artist Content title : BLAZENo. : AFTER 1 001 Kanenonaiyoru THE RAIN : BRAZE Press [34] to select the tracks and press [ENTER]. AFTER THE RAIN NEVER MORE EAT ME RAT RACE Garasu No Jealousy BAD BOY SHOUT MY LOUD VOICE RUN TO THE SKY YOU SEND ME DO THE NIGHT To exit the screen : Press [RETURN]. RETURN to exit to select and press ENTER Press [DISPLAY] to switch between guide messages and the playback condition indicator. 17 RQT8912 Playing HighMATTM discs/Playing programs/playlists/Playing CD using menus Enjoying in a car Do not leave the unit on a surface that may become hot such as a dashboard. The unit is not heat-resistant so may malfunction. The driver must not operate this unit while the vehicle is moving. Do not operate this unit where it can be viewed by the driver. Driver operation or viewing of this unit while the vehicle is moving will cause distraction which may result in serious accident and personal injury or property damage. Enjoying video in the back seat with the Headrest Mounting Bracket You can enjoy video in the back seat attaching the unit to the back of the front seat. [DVD-LS82] [DVD-LS850] included [DVD-LS80] not included Please insert the disc before attaching the unit to the headrest bracket. Do not attach or detach while driving, and do not attach in the following locations, otherwise it may result in injury or traffic accidents: ­anywhere other than the back of the seat ­in a location that interferes with the driver's view or operation of the car ­in a location that interferes with the operation of an airbag ­in a location that interferes with the driving instruments Make sure that the bracket belt is securely fastened, and check the lock on the unit. In the event of an accident, sudden acceleration, or braking, the unit could become loose and cause injury. Enjoying in a car 1 Attaching the headrest bracket to the front seat. 2 Close the buckle and adjust the belt until it fits tightly around the headrest. Side view If this space is larger than 3 cm (1 3/16q), the unit could become loose and cause injury in the event of an accident etc. 1 Adjust the headrest so there is an open space of about 3 cm (1 3/16q). Headrest Mounting Bracket (included) Attach to the seat so that the label side of the bracket can be seen from the rear of the seat. 2 Adjusting the monitor. 2 Rotate the monitor backwards so the screen is facing out. 1 Fold the monitor down towards the front of the unit. 18 RQT8912 3 Attaching the unit to the bracket. While holding the unit with both hands, line up the unit just below the protruding sections on the bracket. Press the unit down about 4 to 5 mm (5/32q to 3/16q) so that the protrusions on the bracket fit into the holes on the bottom of the unit. Please check the following points before use. ­The bracket is securely fastened to the unit. ­The unit is not loose and cannot be lifted upwards. When correctly attached, you will hear a locking sound. click! Diagram of attached bracket Use the monitor in the open position as shown in the illustration to the right to prevent abnormal audio or damage resulting from vibrations in the car. The angle of the monitor can be adjusted up to about 30°. The angle of the monitor may shift while driving due to vibration, etc. Depending on the type of headrest, you may not be able to attach the bracket. 30° Releasing the unit from the bracket 23 cm (9 1/16q) or less In the event of an accident etc. , the unit could become loose and cause injury. Release button 1 Press the release buttons (left and right) in towards the center of the bracket. Do not press the release buttons any time other than when detaching the unit from the bracket. 19 RQT8912 Enjoying in a car Enjoying in a car Connecting the included Car DC Adaptor Before connection, consult your car owner's manual or your dealer. Connect to the cigarette lighter socket of a vehicle that has a 12 V battery. It is not compatible with a vehicle that has a 24 V battery. This is a special negative grounded Car DC Adaptor. Using this Car DC Adaptor with a plus grounded car can cause malfunction and lead to fire. Car DC Adaptor (included) DC IN To the cigarette lighter socket Enjoying in a car Left side of this unit Place the unit on a stable surface. Replacing the fuse Replace only with the specified 125 V/250 V, 2. 5 A fuse. [. . . ] and "DTS 2. 0" is a trademark of DTS, lnc. 4, 631, 603, 4, 577, 216, and 4, 819, 098, licensed for limited viewing uses only. This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. [. . . ]