User manual PANASONIC DVD-LV60PPS

[. . . ] Example: 3 ALL 2 3 6 For Australia and N. Z. The region number of this player is "4". The player will play DVD-Video marked with labels containing "4" or "ALL". Example: 4 For Russia ALL 2 4 6 The region number of this player is "5". The player will play DVD-Video marked with labels containing "5" or "All". [. . . ] The soundtrack currently playing is number 1. You can also use this button to turn the vocals on and off on karaoke discs. Read the disc's instructions for details. RQT6043 13 Advanced operations Using Graphical User Interface (GUI) screens For your reference Depending on the condition of the unit (playing, stopped, etc. ) and the type of software you are playing, there are some items that you cannot select or change. title No. ), the numbered buttons are also effective for setting. After entering numbers, press [ENTER] to register the setting. To clear the icons Press [RETURN] until the menus disappear. OPEN/CLOSE DISPLAY TOP ME NU DISPLAY M EN U 3, 4, 2, 1/ ENTER GROUP PAGE ENTER MARKER RETURN SUBTITLE SKIP AUDIO SLOW/SEARCH RETURN To change the position of the icons 1. Move [2, 1] to select the rightmost icon. (There are 5 positions) STOP PAUSE PLAY 1 4 7 CANCEL 2 5 8 0 3 6 9 > 10 = A ª Disc information Numbered buttons e. g. DVD-Video T 2 C 2 AUDIO HP-V. S. S. ONLY ANGLE 1 : 46 : 50 Î Digital 1 ENG 3/2. 1 ch d e ON 1 ENG 1 REPEAT A-B PLAY SETUP MODE REPEAT MODE a b c f g e. g. Video CD Advanced operations GT Page 1 T h LR PBC ON i j GUI screens are menus that contain information about the disc or unit. Peripheral equipment and optional cables sold separately unless otherwise indicated. Before connection, turn off all equipment and read the appropriate operating instructions. To enjoy stereo or Dolby Pro Logic ª Analog connection A Connect an analog amplifier or system component. ª Digital connection B Connect a digital amplifier or system component. Change "Digital output" ( page 20). DIGITAL AUDIO OUT (PCM/BITSTREAM) AUDIO OUT 5. 1ch CENTER SURROUND L FRONT L 2ch L VIDEO OUT S VIDEO OUT DIGITAL AUDIO OUT (PCM/BITSTREAM) AUDIO OUT 5. 1ch CENTER SURROUND L FRONT L 2ch L VIDEO OUT S VIDEO OUT OPTICAL OPTICAL SUBWOOFER R SURROUND R FRONT R SUBWOOFER R SURROUND R FRONT R Red White Insert fully, with this side facing up. Audio cable Optical digital audio cable Do not bend when connecting. L R AUX IN OPTICAL Amplifier or system component To enjoy Dolby Pro Logic If you connect an amplifier that can decode Dolby Pro Logic, you will also need to connect center and surround speakers to enjoy surround sound. Read the instructions for the equipment for connection details. Dolby Pro Logic will not function correctly if Advanced Surround is on. Recording to MDs or cassette tapes Analog recording You can record to an MD or cassette deck. Using analog connection means sound will be unaffected by the copy guards found on DVDs. To make an analog recording Connect the recording equipment with an audio cable ( [A] above). Connect the recording equipment with an optical digital audio cable ( [B] above). When recording DVDs, make the following settings. ADVANCED SURROUND V. S. S. : OFF ( page 10) PCM Down Conversion: Yes ( page 20) Dolby Digital/DTS Digital Surround/MPEG: PCM ( page 20) MPEG: Not available in Asia. Digital recording You can record the digital signal directly onto an MD. The signals on DVDs will be converted to 48 kHz/16 bit linear PCM. Ensure the following conditions are met. [. . . ] "H" appears on the unit's display. "NO DISC" appears on the unit's display. You inserted a disc the unit cannot play; insert one it can. 6 Go to Display in the SETUP menus, and select "On" for "On-Screen Messages". [. . . ]