User manual PANASONIC DVD-LX95

[. . . ] Music (WMA/MP3), Still pictures (JPEG) & Video (MPEG4) recorded with Panasonic SD multi cameras, etc. Operations in these instructions are described mainly with the main unit, but you can do the operations on the remote control if the remote controls are the same ( Back cover) Les instructions du présent manuel font référence à l'appareil. Canada: The warranty can be found on page 38. la garantie se trouve à la page 36. [. . . ] You can enjoy listening to discs or SD through your FM radio channel (e. Adjust the volume on the unit using the volume scale on the LCD as your guideline. ­ When playing a music CD, adjust to a level near the center of the volume scale on the LCD as the guideline. ( see below, step 2-2 in "When this has not been successful") When this has not been successful Noise is heard from the FM radio channel between each press. J When noise is heard J When there is interference with the local FM stations 7 MHz which is not being used by a broadcasting station. Tune the FM radio into the frequency selected in step 2. When noise is heard, bring the antenna and this unit closer. There are items which you can select using the numbered buttons and [ENTER] on the remote control. To start from a specific time§ (Time Search) To change remaining/elapsed time display To display pixel number ( page 13, Changing soundtracks) To display the current bitrate or sampling frequency To switch still picture To show thumbnail images ( page 13, Changing subtitles) To recall a marker recorded on DVD-Video recorders ( page 13, Angle select) ( page 13, Still picture rotation) To turn on/off slideshow To change the slideshow timing (0 to 30 sec) ( See below) Except iR/iRW ( page 12, Changing play speed) [JPEG] [SD\PICTURE]: The Repeat and Marker functions can be used. Play Menu (Only when the elapsed play time can be displayed, repeat A-B Repeat ( page 12, Repeat play) ( page 12, A-B Repeat) To mark up to 5 positions to play again [ENTER] (The unit is now ready to accept markers. ) To mark a position: [ENTER] (at the desired point) To mark another position: [2 1] to select "¢" [ENTER] To recall a marker: [2 1] [ENTER] To erase a marker: [2 1] [CANCEL] (Remote control) This feature doesn't work during program and random play. Markers you add clear when you open the disc lid, remove the card, select another source or switch the unit to standby. ( page 12, Enjoying virtual surround) To make the dialogue in movies easier to hear [DVD-V] (Dolby Digital, DTS, 3-channel or over, with the dialogue recorded in the center channel) On , ------. Off ( page 14, Reproducing more natural audio) Off ([JPEG] [SD\PICTURE] [MPEG4] [SD\VIDEO]: Off, Date, Details) Auto, 0 to s7 ]RAM\ [DVD-RW[<VR>] [DVD-V] [VCD] To expand the letterbox picture to fit the screen. 00 depending upon the connected television and its settings. ( page 26, Changing the player settings) Select "Play as DVD-Video" to play DVD-Video contents on DVDAudio. Select "Play as Data Disc" to play JPEG or MPEG4 files on DVD-RAM that contain both [RAM] and another format (e. [JPEG]) or to play HighMAT discs without using the HighMAT function. Checking the play status (Elapsed play time indicator) Press [DISPLAY] twice. Play mode : Normal Play ALL: All Group Play [DVD-A] PGM: Program Play RND: Random Play PBC: Playback control play [VCD] Underlined items are the factory presets. The settings remain intact even if you switch the unit to standby. While stopped, the menu is also displayed when [MENU] on the main unit is pressed; however, when a DVD-RAM or HighMAT CD is being used a playlist menu appears. [. . . ] Safety check--After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition. Customer Care Centre at 1-800-561-5505, or visit the website (www. Warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect, or at its option, replace the product for a period as stated below from the date of original purchase. One (1) year, parts and labour One (1) year, parts and labour Ninety (90) days LIMITATIONS AND EXCLUSIONS This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed, subjected to usage for which the product was not designed, misused or abused, damaged during shipping, or which has been altered or repaired in any way that affects the reliability or detracts from the performance, nor does it cover any product which is used commercially. [. . . ]