User manual PANASONIC DVD-S33

[. . . ] Table of contents Operating Instructions DVD/CD PLAYER Model No. Caution for AC Mains Lead/Accessories. . 10 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. [. . . ] 4 When "VERIFY" is displayed, please verify the password and input it again. Output signals from NTSC discs remain as NTSC. NTSC disc can be viewed on PAL television. [Asia]: "NTSC" is the factory preset. STILL MODE AUTO FIELD: The picture is not blurred, but picture Specify the type of picture quality is lower. FRAME: Overall quality is high, but the picture may appear blurred. VIDEO/YPbPr VIDEO OUT-SCART§5 Choose the video signal format S-VIDEO/YPbPr to be output from the SCART and RGB/NO OUTPUT COMPONENT VIDEO OUT terminals ( 6) VIDEO OUT (I/P) INTERLACE Select "PROGRESSIVE" only if PROGRESSIVE When you select "PROGRESSIVE", a message connecting to a progressive screen will appear. For progressive output, press [3] and then press [ENTER]. PAL60: "AUDIO" menu SETTING STATE PCM OUTPUT Check the digital input limitations of the equipment you connect using COAXIAL terminal and select the maximum sampling frequency of PCM digital output. Display the current setting of the items below UP TO 48 kHz: When connected to equipment compatible with 44. 1 or 48 kHz UP TO 96 kHz: When connected to equipment compatible with 88. 2 or 96 kHz Signals from copy-protected discs are converted to 48 or 44. 1 kHz. Some equipment cannot handle sampling frequencies of 88. 2 kHz, even if they can handle 96 kHz. Read your equipment's operating instructions for details. BITSTREAM PCM BITSTREAM PCM BITSTREAM PCM ON: Adjusts for clarity even when the volume is low through compressing the range of the lowest sound level and the highest sound level. (Only works with DOLBY DIGITAL) OFF Select "BITSTREAM" when the equipment can decode the bitstream (digital form of multi-channel data). (If the bitstream is output to the equipment without a decoder, high levels of noise can be output and may damage your speakers and hearing. ) "OTHERS" menu SETTING STATE REGISTRATION Displays the unit's registration code. JPEG TIME Display the current setting of the items below You need this registration code to purchase and play DivX Video-on-Demand (VOD) content. Select "SHOW CODE" and press [ENTER]. ( 18, About DivX VOD content) To change the slideshow timing 1 SEC to 15 SEC (in 1 unit) 15 SEC to 60 SEC (in 5 unit) 60 SEC to 180 SEC (in 30 unit) "3 SEC" is the factory preset. BRIGHT DIM AUTO: The display is dimmed, but brightens only when you perform some operations. ON: OFF QUICK SETUP Select "SET" and press [ENTER]. DEFAULTS Select "RESET" and press [ENTER]. This returns all The password screen is shown if "RATINGS" ( 16) is set. values in the setup Please enter the same password with the numbered buttons, menus to the default then press [ENTER], then turn the unit off and on again. [. . . ] The total combined maximum number of recognizable audio, picture and video contents and groups: 4000 audio, picture and video contents and 256 groups. RQTC0118 ­If you see this symbol­ Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. "DTS" is a registered trademark of DTS, Inc. and "DTS 2. 0 + Digital Out" is a trademark of DTS, Inc. [. . . ]