User manual PANASONIC DVD-S700EP

[. . . ] DO NOT OBSTRUCT THE UNIT'S VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS. DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT. DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER. THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES. Voltage Do not use high voltage power sources. This can overload the unit and cause a fire. [. . . ] Pressing also activates forward frame-by-frame. * You cannot move backwards frame by frame with VIDEO CD. 8 RQTD0003-2B Repeat and resume functions REPEAT CHAPTER REPEAT TITLE REPEAT OFF DVD VIDEO Repeat play [DVD, VCD, CD, MP3] Press REPEAT during play, the display changes as illustrated. DVD CHAPTER TITLE OFF DISC OFF Video CD/CD TRACK MP3 TITLE FOLDER OFF Repeat play does not work if the elapsed playback time is not shown on the unit's display. * There is no mode for repeating the whole DVD. You cannot use repeat play to restart an entire DVD or MP3 disc. If the video CD has playback control Press STOP during play until "PBC " disappears from the display. Press MENU. VIDEO CD SET POSITION A SET POSITION B A-B repeat play [DVD, VCD, CD] You can repeat a section between points A and B within a title or track. Press A-B REPEAT at the finishing point, (B). To cancel this function, press A- B REPEAT and wait until the is switched off. When the end of a title/track/chapter is reached, the unit automatically determines the end as point B. * A-B repeat play does not work if the elapsed playback time is not shown on the unit's display. Random play [DVD, VCD, CD, MP3] The unit plays the tracks on a disc in random order. The settings remain in the memory even if you turn the unit off. Recalling the settings Press the button ONE TOUCH MEMORY . To cancel Press the button ONE TOUCH MEMORY to set the factory preset. The button light turns off. RQTD0003-2B 10 Home Theatre terminal on amplifier L Connecting an analogue amplifier or system component DIGITAL AUDIO AUDIO OUT OUT White ( PCM/ L BITSTREAM ) VIDEO S VIDEO OUT OUT Please connect directly to TV Analogue recording You can record to a Mini Disc (MD) or cassette tape. Audio cable R Red R OPTICAL SUBWOOFER Connecting a digital amplifier or system component DIGITAL AUDIO AUDIO OUT OUT ( PCM/ L BITSTREAM ) VIDEO S VIDEO OUT OUT Please connect directly to TV terminal on amplifier OPTICAL R OPTICAL SUBWOOFER Optical digital audio cable Insert fully, with this side facing up Digital recording You can record the digital signal directly onto an MD. The recording equipment should handle a sampling frequency of 48 kHz/16 bit . Change the settings in the SETUP menu "AUDIO" as follows. PCM Down conversion : Yes Dolby Digital : PCM DTS Digital Surround : Off MPEG Audio : PCM ADVANCED SURROUND : Off Connecting an amplifier with a built-in decoder or a decoderamplifier combination DIGITAL AUDIO AUDIO OUT OUT ( PCM/ L BITSTREAM ) VIDEO S VIDEO OUT OUT Please connect directly to TV You cannot use DTS Digital Surround decoders not suited to DVD. terminal on amplifier OPTICAL R OPTICAL SUBWOOFER Connecting an active subwoofer terminal on Subwoofer DIGITAL AUDIO AUDIO OUT OUT ( PCM/ L BITSTREAM ) VIDEO S VIDEO OUT OUT Please connect directly to TV You can enjoy more powerful bass by connecting an active subwoofer. Place the subwoofer as close as possible to the front of the center. Turn the BASS-function to "BASS PLUS ON" to boost the output from the subwoofer. Adjust the volume on the subwoofer to suit your preference. Audio cable SUBWOOFER R OPTICAL SUBWOOFER If you connect an amplifier with Dolby Pro Logic-decoder you will also need to connect center and surround speakers to enjoy surround sound. The Dolby Pro Logic-decoder will not function correctly if A. SRD (ADVANCED SURROUND) and BASS PLUS is on. [. . . ] Angle cannot be changed: Only one angle is recorded on the disc. This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone. SOUND No sound, distorted sound: Check the connections. Check the volume on the equipment you have connected. [. . . ]