User manual PANASONIC EB-G520

[. . . ] Operating Instructions Digital Cellular Telephone EB-G520 Main Kit Before operating this equipment please read these instructions completely. Contents Before You Start . 20 Symbols Used, Safety Information, Fitting/Removing the SIM, Fitting/Removing the Battery Key Guard, Phonebook, Messages, Call Service, Call Divert, Security, Network, Personalise Your Telephone . 26 Location of Controls, Display Low Battery, Charging the Battery Basic Operation . 27 Power on/off, Making a Call, Ending a Call, Other Information . [. . . ] When your message has been delivered a confirmation can be received if Report is set to "Yes". The Message Centre may be able to convert the message to the format specified by Protocol. Call Service Calls Service Last Call All Calls Call Waiting Caller's Id Withhold Id Call Charge Broadcasts Broadcast Messages can display information about your current area such as traffic or weather information. The Message List will display the last received broadcast messages. By specifying the required subjects in the Topics List the telephone will receive related messages. If the required topic is not displayed, enter its topic code provided by your Service Provider. The preferred Language in which broadcast messages are displayed can be changed. Cost Left Price/Unit Max Cost Warning At Last Call will display the duration and call charge, if available, of the last call during standby or the current call during a call. Times are indicated as: hours (0-99), minutes (0-59), second (0-59) - HH:MM:SS. All Calls displays the accumulated duration and call charge, if available, of incoming and outgoing calls. The lock code is required to reset the timer and PIN2 is required to reset the timer and call charge. Call Waiting allows you to receive a second call during your current call. When updating or checking the status of call waiting the telephone must be registered with a network. Caller's ID allows you to check the status of Calling Line Identification. The telephone must be registered with a network. 22 Reading a Newly Received Message F B when "Read" is displayed in the option area of the display. 23 Using Withhold ID it is possible to check if you send Calling Line Identification information when you make a call. When checking the Status of Withhold ID the telephone must be registered with a network. Call Charge will set the cost of each unit for call charge information and the required currency in which call charge is displayed. Cost can restrict use of the telephone to a specified number of units. When updating or checking the Status of Call Divert the telephone must be registered with a network. Security Security Phone Lock Call Bar PIN PIN2 Fixed Dial Bar Voice Bar Fax Bar Data Cancel All Status Password NOTE:The duration of one unit may vary during the day, peak and off-peak times. Therefore, the call charge can be calculated accordingly. However, call charge There are three types of security code for your information may not give an accurate reflection of the telephone: tariffs charged by your Service Provider. Lock Code: Controls telephone security - Phone Lock. PIN2: Controls security for Fixed Dial Store and Call Call Divert Voice Calls Charge metering. Fax Calls Data Calls Cancel All Status When Call Divert is enabled the divert icon (t) is displayed. You can divert voice, fax and data calls using different circumstances and to different telephone numbers. It is recommended that you memorise your security codes. If you need to make a note of your security codes, never write them in a way that they can be recognised by another person. [. . . ] Check your SIM supports Fixed Dial. Calls cannot be made from Fixed Dial Store. Incoming calls are barred. Check if the Fixed Dial is switched on (Menu: Security: Fixed Dial). Check the telephone number is stored in the Fixed Dial. Disable the incoming call barring (Menu: Security: Call Bar) The telephone is not registered Move to a coverage area and operate your telephone after to a network. [. . . ]