User manual PANASONIC ER-5209

[. . . ] - Always grip the AC adaptor and not the power cord. ⷠDo not use the clipper if the power cord or the AC adaptor is worn, or if the AC adaptor does not fit snugly in the outlet. ⷠDo not damage or deform the power cord. [. . . ] ⷠDo not wipe the clipper or AC adaptor with thinner, benzine or alcohol. Do not press the blade against the skin. ⷠDo not use the clipper for any purpose other than trimming. ⷠDo not trim the hair of a pet. ⷠCheck that the blades are not damaged or deformed before use. ⷠBefore using each time, apply oil at the places marked with arrows. Charging for longer than 48 hours may shorten the life of the battery. ⷠThe clipper may become warm during operation and/or charging. Charge the clipper at temperatures between 0 °C and 40 °C (32 °F and 104 °F) to work correctly. ⷠDo not use any power cord or AC adaptor other than one This attachment allows thinning of hair by cutting from the inner side. Hair volume is reduced, and hair tips are trimmed at various lengths to leave a natural look. Desirable hair lengths for this attachment: 30 mm-70 mm (hair lengths shorter than 30 mm may be too short to cut in some situations. Actual hair length will be a little longer than the height you set. The symbol means the hand-held part may be cleaned under water. Cutting without an attachment will trim hair length to 1 mm or less. If you connect the AC adaptor to the clipper in the same way as for charging, and set the switch to "1", you can use it even if the battery capacity is low. [. . . ] Warning - Detach the hand held part from the power cord before cleaning it in water. Otherwise the blades may become dull, make abnormal noises, or becomes hot and lead to the deterioration of cutting performance. Disconnect the clipper from the outlet when removing the battery. [. . . ]