User manual PANASONIC ERSB60

[. . . ] 18 Thank you for purchasing this Panasonic product. Before operating this unit, please read these instructions completely and save them for future use. Indb 3 2017/05/25 English 11:00:20 Warning • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. [. . . ] € Apply the oil to the blade before and after each use. ) Failure to apply the oil may cause the following problems. € Do not use thinner, benzine, alcohol or other chemicals. Doing so may cause failure, cracking or discoloration of the main body. Clean the main body only with a soft cloth slightly dampened with tap water or soapy tap water. € Store the appliance in a place with low humidity after use. Charge status lamp ( ) B Blade 7 Cleaning lever 8 Moving blade 9 Stationary blade : Mounting hook C Trimming height comb attachment D Detail trimming attachment E AC adaptor (RE7‑87) (The shape of the power plug differs depending on the area. € Wipe off any water droplets on the appliance socket and the charging stand. 1 Connect the appliance plug to the 2 Plug in the adaptor into a household outlet. 2 1 3 Disconnect the adaptor after charging is completed. After charging is completed Charging with the charging stand ER‑SB60 The charge status lamp ( ) glows. The battery capacity lamp will blink in order of “LOW”, “MID”, and “HIGH” while the charging progresses. The battery capacity lamp and the charge status lamp ( ) will light up and then turn off after 5 seconds. Insert the appliance plug into the charging stand. Place the main body on the charging stand. Plug in the adaptor into a household outlet. Indb 11 2017/05/25 English 11:00:21 Preparation Notes • If there is noise from the radio or other sources while using or charging the appliance, move to a different location to use the appliance. € The battery will deteriorate if not used for over 6 months, so make sure to perform a full charge at least once every 6 months. The lamp on the appliance may not glow for several minutes when first starting charging, but will glow when continuing to charge. •• Recommended ambient temperature for charging is 10 °C – 35 °C. It may take longer to charge, or the charge status lamp ( ) will blink quickly and the battery may fail to charge properly in extremely high or low temperatures. €• When the charge status lamp ( ) is blinking rapidly (twice every second), there is a charging malfunction. [. . . ] ) Confirm that the blade is properly attached. Replace the blades if cutting efficiency reduces substantially despite proper maintenance. This figure must only be used when disposing the appliance, and must not be used to repair it. If you dismantle the appliance yourself, it may cause malfunction. [. . . ]