User manual PANASONIC ES-2027

[. . . ] In the following cases, this appliance should only be used after prior consultation with a physician. Eczema, wounds, inflamed skin reactions such as folliculitis (purulent hair follicles) and varicose veins · Hemophilia or immune deficiency Epilator-the Skin Protector series are designed to remove hair on legs, arms, and sensitive areas like underarms or the bikini-line with each heads depending on the needs. Must never come in contact with the hair on your head, eyelashes, ribbons or clothes, etc. To prevent any danger of injury as well as to prevent blockage or damage of the unit. [. . . ] For legs and arms It is helpful to use a shaver head with pre-epilation comb. For underarms and bikini-line It is helpful to use a shaver head 3 to 5 days before using the epilator. Shaving Before using make sure the blade is not warped or damaged, as this may cause injury. Apply the shaver head so that the whole of the blade is in close contact with the skin. press gently and guide the appliance slowly against hair growth. Applying with too much force prevents hairs from being guided to the blades so that some areas may be left unshaved. Trimmer It is helpful to use the trimmer only when you want to cut the long hair. when the trimmer is up , apply the blade gently. Shaving with pre-epilation comb When the hair is long before epilation, we recommend you to use a shaver head with pre-epilation comb. Place the pre-epilation comb onto the shaver head, and slide trimmer up. When the pre-epilation comb is in place, make sure the comb is in close contact with the skin. Hair is easier to remove after bathing or showering. In order to prevent the risk of ingrowing hairs, we recommend the regular use of massage sponges, e. After cleaning, put the pre-epilation comb on the shaver head. Never remove the outer foil for other reason than to change it. Removing the outer foil While pushing the outer foil gently with the fingers, use the fingernail b to release the plastic panel F on a the blade from the catches F on the inside of the frame. Fitting the new outer foil Holding the outer foil so that the b surface with the plastic panel F (i. The surface that will contact the inner blade) faces upward, insert into the frame so that the catches F on the frame fit into the holes on a the foil. Switch off and unplug the appliance before cleaning. Cleaning of the epilation head Push the frame release buttons and remove the frame. While cleaning, you can turn the epilation discs manually. Be careful not to break the skin protector when cleaning. [. . . ] Do not pull, twist, or severely bent the power cord. Do not wrap the power cord tightly around the appliance. A damaged or defective appliance should be returned to the customer service center or to an authorized customer service agent. Do not attempt to use a defective appliance or repair the appliance yourself. [. . . ]