User manual PANASONIC ES-8161

[. . . ] [for ES8163] When the shaver is being charged, the backlight of LCD display turns on, and the plug symbol appears (see fig. It shows the remaining battery capacity from 0% to 100%, in 10% increments. When the charging is completed, it will indicate "100%" and the backlight of LCD display will flash once in about 1 second. It will flash once in about 2 seconds for 10 minutes after charging is completed (see fig. [. . . ] You may gently increase the amount of pressure as your skin becomes accustomed to this shaver. Applying excessive pressure does not provide a closer shave. 4) Use the pivot action selector to choose the shaving mode, "soft" (soft) and "lock" (lock) based on your shaving preference. The pivot action can be changed whether the switch is turned on or off. They move up and down independently to follow the contours of your face. The slit blade catches and cuts longer and lying hairs easily. 7) Warning ­ To prevent electric shock or personal injury, disconnect the power cord from the shaver before cleaning with water. For cleanliness and convenience, we recommend that you clean your shaver with water and a liquid hand soap. Regular cleaning will keep your shaver in good condition while preventing odors or bacteria from developing, and maintain the cutting performance. With the system outer foil in place, apply some hand soap onto the outer foil. Push and hold the On/Off switch more than 2 seconds to activate the turbo mode for "sonic" vibration cleaning. After about 20 seconds, it will be automatically turned off, or you can turn it off by pushing the On/Off switch. Remove the system outer foil and push the On/Off switch more than 2 seconds to activate the turbo mode for "sonic" vibration cleaning and clean it with running water. Wipe off any moisture from the shaver with a dry cloth and dry it with- It is recommended to clean your shaver with the "sonic" vibration cleaning when the tap symbol (a) appears in LCD (ES8163). Remove the inner blades one at a time by grasping it firmly at both ends and pulling it straight away from the shaver. Clean the outer foils, the shaver body and the trimmer with the long brush (see fig. Clean the inner blades with the short brush by moving it in the direction in fig. Do not use the short brush to clean the outer foils. Put a thin layer of shaving foam on your face which works as a lubricator. Shaving foam is the most suitable among many other shaving aids (gel, soap, cream, etc. Do not put a thick layer of shaving foam as it may affect shaver's performance. If the shaving head is clogged with foam, simply rinse it under running water. [. . . ] Clean it by using a cloth dampened with soapy water. Do not take the housing apart as this can affect the watertight construction. Do not clean with water when the shaver is connected to the power cord. When cleaning the shaver with water, do so with both the inner blades attached. [. . . ]