User manual PANASONIC ES-8249

[. . . ] You can fully charge the shaver in 1 hour if the LCD display shows 10% and lower. the plug symbol blinks in the LCD display when the remaining battery capacity is 10% and less. The unit can be used once or twice more after the LCD display starts to show 10%. (Differs depending on the use situation. [. . . ] Before each use, always check the foil for damage. To avoid personal injury, do not use if the foil or other parts of the shaving head is damaged. Disconnect the power cord from the shaver, and push the On/Off switch to turn the shaver on. If you push and hold the On/Off switch for more than 2 seconds, it will activate the turbo mode for "sonic" vibration cleaning. (see "Cleaning your shaver") Caution: Shaving with "sonic" vibration may damage your skin. Please turn it off and on again to deactivate the turbo mode. Do not place fingers on the On/Off switch during use. This may cause the shaver to stop during use or change it to the "sonic" vibration cleaning mode. Place your finger on the finger rest during use. Start out shaving by applying gentle pressure to your face. Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. It is recommended that you replace the system outer foil at least once a year and the inner blade at least once every 2 years to maintain your shaver's cutting performance. To insert the new system outer foil, press down until it snaps into place. Place the trimmer at a right angle to your skin and move it downward to trim sideburns. Remove the inner blade one at a time by grasping it firmly at both ends and pulling straight away from the shaver. Do not touch the metal parts of inner blades. To insert the new inner blade, hold the blade one at a time at both ends and press downward until it snaps into the shaver. Disconnect the power cord from the shaver when removing the battery. Please make sure that the battery is disposed of at an officially assigned location, if there is one in your country. How to remove the built-in rechargeable battery before disposal of the shaver (see fig. 12) WARNING: Do not attempt to replace the battery for the purpose of reusing the shaver. This could result in the risk of fire or electric shock. [. . . ] In cases where static noise is emitted from the television during use or recharging, connect the adaptor to a different outlet. Failure to observe this may lead to hand injuries. Also, do not use cleaning products that are designed for toilets, bathrooms or kitchen appliances. Do not wipe any part of the shaver with thinner, benzine or alcohol. [. . . ]