User manual PANASONIC ESSL33

[. . . ] 16 Thank you for purchasing this Panasonic product. Before operating this unit, please read these instructions completely and save them for future use. 3 PB013084 - ES-SL33_ (01EN)_05-19-16. Indd 3 2016/5/19 17:34:06 Safety precautions To reduce the risk of injury, loss of life, electric shock, fire, and damage to property, always observe the following safety precautions. [. . . ] - The battery fluid may cause inflammation or injury if it comes in contact with the skin or clothes. Wash it off thoroughly with clean water and consult a doctor. Do not bring the system outer foil into contact with hard object. Doing so may damage the blades as they are very thin and deform easily. Do not dry the main unit with a dryer or a fan heater. Doing so may cause malfunction or deformation of the parts. Do not leave the shaver exposed to direct sunlight with the foil frame detached. Doing so may deteriorate the waterproof rubber and degrade waterproof function, which may cause to malfunction. Store the shaver in a place with low humidity after use. failure to do so may cause malfunction due to condensation or rust. If only one of the inner blades is inserted, the shaver may be damaged. If you clean the shaver with water, do not use salt water or hot water. Do not soak the shaver in water for a long period of time. Intended use This WET/DRY shaver can be used for wet shaving using shaving lather or for dry shaving. You can use this watertight shaver in the shower and clean with water. The following symbol means suitable for use in a bath or shower. Treat yourself to wet lather shaves for at least three weeks and notice the difference. Your Panasonic WET/DRY shaver requires a little time to get used to because your skin and beard need about a month to adjust to any new shaving. Power plug  Adaptor  Power cord  Appliance plug (Back)   B 4 Cleaning shutter 5 Finger rest 6 Power switch 7 Charge status lamp ( 8 Appliance socket 9 Water inlet  Outer foil section  System outer foil   release buttons  Inner blades ) A S C G Y T V 9 PB013084 - ES-SL33_ (01EN)_05-19-16. Indd 9 2016/5/19 17:34:07 Using the carrying holder The shaver can be kept vertically or horizontally. When transporting the shaver, you can use the carrying holder to protect the outer foil and prevent erroneous operation of the switch. When transporting the shaver, be sure to clean off any shavings before attaching the carrying holder. [. . . ] Press the power switch to turn on the power and then keep the power on until the battery is completely discharged. Perform steps 1 to  and lift the battery, and then remove it. Take care not to short circuit the positive and negative terminals of the removed battery, and insulate the terminals by applying tape to them.       15 PB013084 - ES-SL33_ (01EN)_05-19-16. [. . . ]