User manual PANASONIC EW-TDEF4

[. . . ] € Please keep these Operating Instructions and the warranty for future use. TC25 Safety Precautions Please observe To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. – The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed. DANGER WARNING CAUTION Denotes a potential hazard that will result in serious injury or death. [. . . ] Pause (once) Switch on 30 seconds Pause (once) 30 seconds 30 seconds Pause (once) 30 seconds Pause (twice) The ion lamp turns on or blinks to indicate whether ionic power* is being applied to the teeth. * Ion power is a weak electric current passed through the ions in saliva. The main unit pauses twice at 2-minute intervals then starts again. GUMCARE mode does not have this function. Example of brushing sequence Divide your teeth into 4 parts (upper and lower, left and right), and brush one part at a time in order such as “① front of the teeth”, “② biting plane of the teeth”, and “③ back of the teeth” spending 30 seconds on each. By brushing the above 4 parts for 30 seconds each (about 2 minutes), you can evenly brush your teeth without missing any spots in your mouth. ‘ ② ③ Pressing the power switch activates the mechanism that generates the very weak electric current, and the ion lamp blinks on and off. Putting the brush in your mouth passes a very weak electric current in the oral cavity, ionic power is activated and the ion lamp turns on. You can easily see the lamp status if you use a mirror while brushing. Ionic power is not employed with the point brush. Pdf Refine_15-10-14 13:55:44 B640462_EW-TDEF4_tori 6 15-11-13 17:27:40 Parts Identification Ionic extra fine brush Ionic multi-fit brush Point brush Ionic two-way silicone brush Electrode section AC adaptor Model number: RE7-87 Carrying case Storage diagram Brush head electrode section Identification ring Brush head electrode section Cord Power plug Inner frame (6 pcs. Move the brush head with the bristles lightly touching your teeth. When first using this appliance, some people may experience a tickling or tingling sensation caused by the sonic vibrations. The sensation should subside after you use the toothbrush several more times. A sound may be heard when the brush head is pressed too strongly against the teeth, but this is not a malfunction. Turn off the main unit when you have finished brushing. Turn off the main unit before removing it from your mouth to prevent saliva from spattering. Pdf Refine_15-10-14 13:55:45 EN14 B640462_EW-TDEF4_tori 9 15-11-13 17:27:40 Tips on Usage Brushing Ionic extra fine brush When you want to brush mainly the boundary between the teeth and gums. (You can also brush the teeth front surface and the biting surface. ) Ionic multi-fit brush When you want to make your teeth front surface and biting surface clean. (You cannot brush the boundary between teeth and gums. ) Choose the brush head depending on use and area. [. . . ] 60 minutes (at 20 °C with 300 g load when fully charged) Approx. EN13) ▶ Some people may notice a taste or sense an electric current. This is because of the very weak electric current running inside the oral cavity. Concerned users are advised to use SOFT mode. [. . . ]