User manual PANASONIC EY0214PA1

[. . . ] wire size is large enough for ampere rating of charger as specified below. CAUTION - To reduce the risk 8) Do not operate charger with damaged cord or plug--replace them immediately. 9) Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. 10) Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. [. . . ] 11) To reduce the risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. 12) The charger and battery pack are specifically designed to work together. Do not attempt to charge any other cordless tool or battery pack with this charger. 13) Do not attempt to charge the battery pack with any other charger. 14) Do not attempt to disassemble the battery pack housing. 15) Do not store the tool and battery pack in locations where the temperature may reach or exceed 50°C (122°F) (such as a metal tool shed, or a car in the summer), which can lead to deterioration of the storage battery. 16) Do not charge battery pack when the temperature is BELOW 0°C (32°F) or ABOVE 40°C (104°F). Do not use charger in damp or wet locations. 19) The charger is designed to operate on standard household electrical power only. When charging is completed, an internal electronic switch will automatically be triggered to prevent overcharging. Charging will not start if the battery pack is warm (for example, immediately after heavy-duty operation). The orange standby lamp will be lit until the battery cools down. When charging is completed, the charg ing lamp will start flashing quickly in green color. When in any of the conditions that battery pack is too cool, or the battery pack has not been used for a long time, the charging lamp is lit. In this case, charging takes longer to fully charge the battery pack, than the standard charging time. If a fully charged battery pack is inserted into the charger again, the charging lamp light up. After several minutes, the charging lamp may flash quickly to indicate the charging is completed. If the charging lamp does not light imme diately after the charger is plugged in, or if after the standard charging time the lamp does not go off, consult an authorized dealer. [. . . ] After several minutes, the charging lamp may flash quickly to indicate the charging is completed. If the charging lamp does not light imme diately after the charger is plugged in, or if after the standard charging time the lamp does not go off, consult an authorized dealer. NOTE: When charging a cool battery pack (below 5°C (41°F) in a warm place, leave the battery pack at the place and wait for more than one hour to warm up the battery to the level of the ambient temperature. Other- -3- wise battery pack may not be fully charged. [. . . ]