User manual PANASONIC EY6506

[. . . ] Cordless Impact Driver Operating Instructions Model No: EY6506 IMPORTANT This manual contains safety information. Read manual completely before first using this product and save this manual for future use. . GENERAL SAFETY RULES - FOR ALL BATTERY OPERATED TOOLS WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work Area 1) Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. [. . . ] Equal to or But less Length of Cord, Feet greater than than 25 50 100 150 0 2 18 18 18 16 . FOR FOR BATTERY CHARGER & BATTERY PACK IMPORTANT SAFETY INSTRUCTIONS 1) SAVE THESE INSTRUCTIONS- This manual contains important safety and operating instructions for battery charger EY0110. 2) Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery pack. 3) of injury, charge only Battery Pack as shown below. EY9065, EY9066, EY9168, EY9080, EY9086, EY9180, EY9182, EY9001, EY9006, EY9101, EY9106, EY9200, EY9201, EY9136, EY9230, EY9231, EY9251, EY9117, EY9210 Other types of batteries may burst causing personal injury and damage. 4) Do not expose charger to rain or snow. 5) To reduce risk of damaging the electric plug and cord, pull by plug rather than cord when disconnecting charger. CAUTION - To reduce the risk 8) Do not operate charger with damaged cord or plug-replace them immediately. 9) Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. 10) Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. 11) To reduce the risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. 12) The charger and battery pack are specifically designed to work together. Do not attempt to charge any other cordless tool or battery pack with this charger. 13) Do not attempt to charge the battery pack with any other charger. 14) Do not attempt to disassemble the battery pack housing. 15) Do not store the tool and battery pack in locations where the temperature may reach or exceed 50°C (122°F) (such as a metal tool shed, or a car in the summer), which can lead to deterioration of the storage battery. 16) Do not charge battery pack when the temperature is BELOW 0°C (32°F) -4- or ABOVE 40°C (104°F). This is very important in order to maintain optimal condition of the battery pack. Do not use charger in damp or wet locations. 19) The charger is designed to operate on standard household electrical power only. Do not attempt to use it on any other voltage!Never carry charger by cord or yank it to disconnect from outlet. Keep cord away from heat, oil and sharp edges. 21) Charge the battery pack in a well ventilated place, do not cover the charger and battery pack with a cloth, etc. , while charging. [. . . ] Clogged with dust or malfunction of the battery pack. . MAINTENANCE Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, benzine, or other volatile solvents for cleaning. BATTERY RECYCLING ATTENTION: FOR Ni-MH Battery Packs, EY9200 A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. The power required for tightening a bolt will vary, according to bolt material and size, as well as the material being bolted. [. . . ]