User manual PANASONIC EY6535GQW

[. . . ] This can cause the rechargeable battery to wear quickly or damage the internal mechanism of the motor. 10) Young children should be supervised to ensure that they do not play with the appliance. 11) Wear ear protectors when using the tool for extended periods. Select Mode Applications & work material Original Options Accessories in the market Wood screw Metal screw (+)(-) head Torx head Driving Impact Wood screw Metal screw Tech screw Plastic anchor Quick change chuck for 6. [. . . ] CAUTION: If the drill bit becomes too tight to remove, hold two lock collars with pipe wrenches and turn them in opposite directions. 6) To detach the chuck, PUSH the button to release the chuck from the square drive. Make sure to remove the drill bit before you set and detach the keyless drill chuck. It snaps into place to indicate proper connection. The speed increases with the amount of depression of the trigger. When beginning work, depress the trigger slightly to start the rotation slowly. A feedback electronic controller is used to give a strong torque even in low speed. The brake operates when the trigger is released and the motor stops immediately. When operating with a Ni-MH battery pack, make sure the work place is well-ventilated. For Appropriate use of Battery pack Charge the Ni-MH battery fully before storage in order to ensure a longer service life. If the battery pack is used when the battery temperature is below 0°C (32°F), the tool may fail to function properly. When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. When operating with a Ni-MH battery pack, make sure the place is well-ventilated. (Forward ( ), Switch lock, Reverse ( )) CAUTION: Do not operate reversing lever until rotation of the spindle comes to a complete stop. Shifting during rotation of the chuck may damage the tool. After use, set the lever to its center position (switch lock). If the operation time becomes extremely short after recharging, replace the battery pack with a new one. Do not close up vent holes on the sides of the body during operation. Square drive and accessory become very hot. Keep body or skin away from exhaust vent to avoid risk of being burned by hot air. ATTENTION: For environmental protection and recycling of materials, be sure that it is disposed of at an officially assigned location, if there is one in your country. Note: When you charge the battery pack for the first time, or after prolonged storage, charge it for about 24 hours to bring the battery up to full capacity. [. . . ] 7 mm (1/2") square drive with ball detent 2. Note: This chart may include models that are not available in your area. CAUTION: This Panasonic Multi Drill & Driver is designed to use only battery pack type EY9230, EY9136. Use with other battery pack type may damage the tool and the battery, and may result in the risk of fire and personal injury. [. . . ]