User manual PANASONIC FP-15HU1

[. . . ] Important Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine. Notes: Some illustrations in this manual might be slightly different from the machine. Certain options might not be available in some countries. For details, please contact your local dealer. Caution: Use of controls or adjustments or performance of procedures other than those specified in this manual might result in hazardous radiation exposure. [. . . ] Pressing and holding down the relevant key changes the width in increments of 10 mm (0. 4 inch). If you select to erase the image on the back of the original, press [2 Sided Setting] and [Back]. Erasing the image on the back is valid when you copy 2-Sided originals. F Press [OK] twice. G Place the originals, and then press the {Start} key. Note To change the value entered in step E, press [n] and [o] to set a new value. 94 Copier Functions Border Erase (different width) This mode erases the edge margin of the original image. A Press [Edit / Stamp]. 2 B Press [Erase]. E Press the key for the border you want to change and set an erase width with [n] and [o]. Pressing [n] or [o] changes the width in increments of 1 mm (0. 1 inch). Pressing and holding down the relevant key changes the width in increments of 10 mm (0. 4 inch). If you select to erase the image on the back of the original, press [2 Sided Setting] and [Back]. Erasing the image on the back is valid when you copy 2-Sided originals. F Press [OK] twice. G Place the originals, and then press the {Start} key. 95 Copying Center Erase This mode erases the center margin of the original image. A Press [Edit / Stamp]. 2 B Press [Erase]. E Set the erase center width with [n] and [o]. Pressing [n] or [o] changes the width in increments of 1 mm (0. 1 inch). You can input lengths of 0 ­ 432 mm, 0 ­ 17". 2 B Press [Edit / Stamp]. C Press [Erase]. E Enter the value of [X1] with the number keys, and then press [q]. F Enter the value of [Y1] with the number keys, and then press [q]. G Enter the value of [X2] with the number keys, and then press [q]. H Enter the value of [Y2] with the number keys, and then press [q]. If you select to erase the image on the back of the original, press [2 Sided Setting] and [Back]. Erasing the image on the back is valid when you copy 2-Sided originals. I Press [OK] twice. J Place the originals, and then press the {Start} key. 100 Copier Functions Background Numbering Use this function to have numbers printed on the background of copies. If this function is used in conjunction with Sort, same numbers are printed on a department basis, helping you to keep track of confidential documents. Important You cannot use the bypass tray with this function. 2 GCSTMP2E A Press [Edit / Stamp]. B Press [Stamp]. D Enter the number to start counting from with the number keys, and then press the {q} key. E Press [OK] twice. F Place the originals, and then press the {Start} key. Note To change the value entered in step D, press [Clear] or the {Clear/Stop} key to set a new value. Reference "Stamp", General Settings Guide 101 Copying Preset Stamp Frequently used massages can be stored in memory and stamped on copies. Important You cannot use the bypass tray with this function. 2 Only one message can be stamped at a time. GCSTMP1E · The following eight messages are available for stamping. "COPY", "URGENT", "PRIORITY", "For Your Info. ", "PRELIMINARY", "For Internal Use Only", "CONFIDENTIAL", "DRAFT" Stamp position and original orientation The stamp positions differ according to the orientation in which you place your originals. GCSTMP5E 102 Copier Functions A Press [Edit / Stamp]. 2 B Press [Stamp]. [. . . ] Date Stamp · When using Combine mode, the date stamp is printed as follows: · With the Combine function AMG026S · With the Magazine or Booklet function 5 AMG027S 199 Appendix Page Numbering · When page numbering is used with Combine mode, page numbers are printed as follows: · Page Numbering per original: With 1 Sided/2 Sided using the Combine function GCANPE0E With the Magazine or Booklet function 5 GCANPE1E · Page Numbering per copy: With 1 Sided/2 Sided using the Combine function GCANPE2E · If you combine this function with the Duplex (Top to Top) function and select [P1, P2. . . ] or [1/5, 2/5. . . ], page numbers on the back are printed as follows: GCSTMPBE A B Front Back 200 Supplementary Information Front Cover, Front/Back Cover · If Blank mode is selected, the cover will not be counted as a copy. · Front and back covers are two-sided copied depending on the settings made in Display Time in Cover Sheet Tray of User Tools (System Settings). Depends on the setting done from Cover Sheet Tray. Depends on the setting done from Paper Type. [. . . ]