User manual PANASONIC FP-1S1CZZ5M

[. . . ] 1 2 3 4 5 6 7 8 9 10 Original cover Side cover Manual bypass Paper guides Side cover open button Front cover Paper tray Operation panel Original table Cover for optional printer interface 11 Paper output tray 12 13 14 15 16 17 18 19 20 21 22 Paper output tray extension Handle Power switch Power cord socket TD cartridge lock release button TD cartridge Drum cartridge Drum cartridge handle Transfer charger Charger cleaner Fusing unit release tab 23 24 25 26 27 Paper feed roller SPF / R-SPF exit area Original guides Document feeder tray Feeding roller cover 1-12) 2 Light ({) and dark (}) keys and exposure indicators Use to adjust the MANUAL (=) or PHOTO ( ) exposure level. W Paper feed location indicator Light up to show the selected paper feed station. E Zoom keys (N, L) Use to select any reduction or enlargement copy ratio from 50 to 200% in 1% increments. Use to select the desired copy quantity (1 to 99). [. . . ] Auto clear (page 1-19) The copier returns to the initial settings a preset amount of time after the last copy is made. This preset amount of time (auto clear time) can be changed. Press and hold down the exposure mode selector key for approximately 5 seconds. To enter the toner save mode, press the light ({) key. The exposure indicator marked "1" will light up, indicating the toner save mode is selected. To return to the standard mode, repeat the procedure but use the dark (}) key to select exposure level "5" in step 3. The user programs allow the parameters of certain functions to be set, changed, or cancelled as desired. Setting the power save modes and auto clear time, and stream feeding mode. Press and hold down the light ({) and dark (}) keys simultaneously for more than 5 seconds until all the alarm indicators (w, t, s and p ) blink and "­ ­" appears in the display. Use the left copy quantity (<) key to select a user program number. The selected number will blink in the left side of the display. When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged. When the internal counter reaches approximately 17, 000 copies, the drum replacement required (w) indicator will light up indicating that replacement of the drum cartridge will be needed soon. When the indicator begins to blink, the copier will stop operating until the cartridge is replaced. Do not remove the protective cover on the drum portion (black paper) of a new drum cartridge before use. The cover protects the drum against external light. Ensure that the bypass tray is open and then open the side cover while pressing the side cover open button. Then, push gently on both sides of the front cover to open the cover. Gently pull the TD cartridge out whilst pressing the lock button. Dispose of the old drum cartridge in accordance with local regulations. Remove the new drum cartridge from the protective bag and remove the protective cover from the cartridge. [. . . ] Reactivity Data Stability Incompatibility (Material to Avoid) Hazardous Decomposition Hazardous Polymerization : : : : Stable None CO and NOx Will not occur : : : : : : : : Not applicable > 3500C (LEL); Not applicable (UEL); Not applicable CO2, dry chemical, foam or water None This material has no unusual fire or explosion hazards. Precautions for Safe Handling and Use Personal Protection Information (Respiratory, Eye Protection and Protective Glove): Use of a dust mask is recommended when handling a large quantity of toner or during long term exposure, as with any non-toxic dust. engineering Control / Ventilation : Not required. Work / Hygienic Practice : Inhalation should be minimized as with any non-toxic dust. [. . . ]