User manual PANASONIC GD87

[. . . ] 113 3 Contents Quick Reference Quick Reference "Press (F) to select". Direction which the user can move around the display screen using the Navigation key. To end a call or return to Idle screen or F +Hold to switch the phone on or off. Indicates that a function is Network and/or third party service dependent. [. . . ] Auto Quote: Enables you to attach text from the message that you are replying to. Set to On or Off. Managing the Inbox and Outbox Once the Inbox or Outbox store are full, any new messages received or created will overwrite existing messages from the oldest first. To prevent messages being overwritten each list should periodically be cleaned up, deleting any messages which are no longer required. Important messages can have a lock applied to them so that they cannot be overwritten when the Send/Receive process is activated. 60 Call Information Call Information Recent Numbers Recently dialled phone numbers will be stored in Last Call. If Caller Identification is available, the caller's phone number for an answered call will be stored in the Answered menu and an unanswered call will be stored in the Unanswered menu. If Caller Identification is not available then calls will still be stored but will have the date and time attributed to them. When the store is full the next phone number will overwrite the oldest. From Idle mode: Select option Select number/name to redial Calling the Last Dialled Number x2 Returning an Unanswered Call Yes Press while number is displayed Last caller's number will be displayed, if available Select number/name to redial 61 Call Information If required, edit number (see `Editing Phonebook Entries') Store number in Phonebook? No When the display shows that you have received calls but not answered them. Call Information International Dialling Call Information Call Information Using the automatic international access code (+) you will be able to dial international numbers without having to know the code for the international exchange. From Idle mode: Press and hold until + is displayed Select international code name Call Duration Use the Calls submenu to display information as follows: Last Call - displays the duration and call charge if available, of the last call. Times are indicated as: hours (0-99), minutes (0-59), seconds (0-59) - HH:MM:SS. All Calls - displays the duration and call charge, if available, of Incoming and Outgoing calls. The lock code or PIN2 is required to reset the timer and call charge. Call Waiting - Check the Call Waiting status. Caller's ID - Check the Caller's ID status. Withhold ID - Access the Withhold ID status. Enter area code and phone number From Idle mode: Phone Option > Call Service > Calls Select function Notes: If the international code is known then it can be entered in the normal fashion followed by the area code and phone number. Many countries / regions include an initial "0" in the area code. This should, in most cases, be omitted when dialling international numbers. If you have difficulties making international calls, contact your service provider. Note: The Calls function is SIM dependent. If the SIM does not support this function, then items under the Calls submenu will be found directly under the Call Service menu. 62 Call Information GPRS Call Duration Use the Connections submenu to display information as follows: Call Charges To maintain control over the cost of calls that are made, the phone can be set to restrict use to a finite number of units overall. Last Connection - displays the duration and amount of data transfer of the last call. Times are indicated as: hours (0-99), minutes (0-59), seconds (0-59) - HH:MM:SS. All Connections - displays the accumulated duration and amount of data transfer. The lock code or PIN2 is required to reset the timer. [. . . ] The purchaser will then be informed whether: (I) the sales company or national distributor will handle the repair service: or (ii) the sales company or national distributor will arrange for trans-shipment of the appliance to the EU/EEA country where the appliance was originally marketed; or (iii) the purchaser may himself send the appliance to the sales company or national distributor in the EU/EEA country where the appliance was originally marketed. If the appliance is a product model which is normally supplied by the sales company or national distributor in the country where it is used by the purchaser, then the appliance, together with this guarantee card and proof of date of purchase, should be returned at the purchaser's risk and expense to such sales company or distributor, which will handle the repair service. In some countries, the affiliated sales company or national distributor will designate dealers or certain service centres to execute the repairs involved. If the appliance is a product model which is not normally supplied in the country where used, or if the appliance's internal or external product characteristics are different from those of the equivalent model in the country where used, the sales company or national distributor may be able to have the guarantee repair service executed by obtaining spare parts from the country where the appliance was originally marketed, or it may be necessary to have the guarantee repair service executed the sales company or national distributor in the country where the appliance was originally marketed. [. . . ]