User manual PANASONIC GP-MF622

[. . . ] Vi erklærer os eneansvarlige for, at dette produkt, som denne deklaration omhandler, er i overensstemmelse med den følgende standarder eller andre normative dokumenter i følge bestemmelserne i direktiv 89/336/EEC. CAUTION: Before attempting to connect or operate this product, please read the label on the bottom. Vi deklarerar härmed värt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med standarddokument, eller andra normativa dokument som framstölls i Direktiv 89/336/EEC. Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus koskee, noudattaa seuraavia standardeja tai muita ohjeellisia asiakirjoja, jotka noudattavat direktiivin 89/336/EEC. säädöksiä. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overensstemmelse med følgende normer eller andre normgivende dokumenter som fælger bestemmelsene i direktiv 89/336/EEC. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is interned to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Press the PAGE button to fix the position of the CAMERA ID. The mode returns to the previous CAMERA ID menu. Notes: · The CAMERA ID stops at the edges of the monitor screen. · The CAMERA ID moves faster if any of A, B or the ITEM button is kept pressed for a second or longer. Returning to the SETUP menu Move the cursor to RET and press the PAGE button. Displaying the CAMERA ID on the monitor screen Move the cursor to CAMERA ID in the SETUP menu and select ON. Command Editing Area . . . . . . . . . . . . . . . . 3. Move the character cursor to a character you want to edit by pressing ITEM, A or B. After selecting the character, press the PAGE button. The selected character appears in the editing area. (The editing cursor in the editing area moves to the right automatically at this moment. ) 5. Repeat the steps above until all characters are edited. The ELC CONT menu appears. CENTER Detection Area 50% Sensing Area 100% Sensing Area ** ELC CONT ** AREA PEAK/AVE ALL P. . . . I. . . . A S CIRCLE (Small Circle) Detection Area RET END -13- M CIRCLE (Medium Circle) Detection Area 4. Press the PAGE button to mask that area. (When the cursor is moved on an area that has already been masked, the mask and cursor start blinking. ) Masked Area (WHITE) L CIRCLE (Large Circle) Detection Area Note: A masked area will be excluded from ELC detection. Repeat the steps 3 and 4 to complete masking. To cancel masking, move the cursor to that area and press the PAGE button. Note: Detection areas are not displayed on the monitor. Manual setting of the ELC detection control area (MANU) You can mask areas on the monitor screen to block the strong brightness manually. Follow the steps below: Note: The manual mask setting field is only displayed on VIDEO1, 2 and S-VIDEO OUT. Move the cursor to the AREA parameter on the ELC CONT menu. The manual mask setting field appears. Cursor (WHITE) Masked Area (WHITE) 6. After masking is completed, press the PAGE button for a second or more. Peak and Average Weight Control (PEAK/AVE) 1. [. . . ] Move the "I" cursor to the "+" side to make the image sharper. Move the "I" cursor to the "-" side to make the image softer. When the "I" cursor is at the end of the "-" side, the horizontal detail level is set to OFF. 8-7. Vertical Detail Gain Control (VDTL GAIN) 1. [. . . ]